Tire and Rim (Rear) - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 9U-7536 | Lift Stand | 1 |
4C-5809 | Electric Hydraulic Pump Gp | 1 | |
B | Wood Blocks | 1 |
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Seperate and Connect".
- Install Tooling (A) in order to raise the machine.
Show/hide table
Illustration 2 g01000739 - Install Tooling (B) between the frame and the axle.
Show/hide table
Illustration 3 g00992757 - Support tire and rim (1) with a suitable lifting device.
- Remove nuts (2) from tire and rim (1).
- Remove tire and rim (1) from the machine. The weight of tire and rim (1) is approximately
658 kg (1450 lb) .
Show/hide table
Illustration 1 | g00992756 |
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 9U-7536 | Lift Stand | 1 |
4C-5809 | Electric Hydraulic Pump Gp | 1 | |
B | Wood Blocks | 1 |
- Support tire and rim (1) with a suitable lifting device. Install tire and rim (1) to the machine. The weight of tire and rim (1) is approximately
658 kg (1450 lb) . - Install nuts (2) to tire and rim (1).
Show/hide table
Illustration 5 g01000739 - Remove Tooling (B) from the frame and the axle.
Show/hide table
Illustration 6 g00992756 - Lower Tooling (A). Remove Tooling (A).
Show/hide table
Illustration 4 | g00992757 |
End By:
- Disconnect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Seperate and Connect".
Caterpillar Information System:
533 and 543 Wheel Feller Bunchers Power Train Tire and Rim (Front) - Remove and Install
C11 and C13 Engines Cylinder Head
533 and 543 Wheel Feller Bunchers Power Train Drive Shaft (Front) - Remove and Install
533 and 543 Wheel Feller Bunchers Machine Systems Seat - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Electronic Control Module (ECM) and Personality Module (PM) - Remove and Install
Installation Instructions for the Machine Security System on the Small Wheel Loaders{7631} Installation Instructions for the Machine Security System on the Small Wheel Loaders{7631}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Felling Head System
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Piston Pump (Saw)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Travel System
R1600G Load Haul Dump Power Train Differential Pinion Preload Adjustment
R1600G Load Haul Dump Power Train Differential
R1600G Load Haul Dump Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
533 and 543 Wheel Feller Bunchers Machine Systems Hand Pump (Hydraulic Oil Fill) - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Engine Oil and Filter - Change
TH210 and TH215 Telehandlers Power Train Hydrostatic Drive Motor - Install
AP655D and BG655D Asphalt Pavers Propel System Piston Motor (Propel) (Mobil-Trac)
AP-655C and BG-2255C Asphalt Pavers Propel System Final Drive Planetary
AP-655C and BG-2255C Asphalt Pavers Propel System Hydraulic Cylinder (Track Tension)
AP-655C and BG-2255C Asphalt Pavers Propel System Accumulator (Track Tension)
14H Motor Grader Power Train Drive Sprocket - Remove and Install
AP555E and BG555E Asphalt Pavers Propel System Accumulator Charging Valve (Track Tension)
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Fuel Injection Pump
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Fuel Injection Pump
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Stabilizer Cylinder - Remove and Install