R1600G Load Haul Dump Power Train Caterpillar


Bevel Gear and Pinion (Fixed and Oscillating Axles)

Usage:

R1600G 9PP



图 1g00293218

(1) 装配前,润滑螺栓螺纹和垫圈表面。

16 根螺栓的扭矩 ... 285 ± 40 N·m (210 ± 30 lb ft)
到达特定扭矩后旋紧 ... 120 ± 5°

Caterpillar Information System:

R1600G Load Haul Dump Power Train Pressure Switch (Axle Oil)
R1600G Load Haul Dump Power Train Temperature Switch (Axle Oil)
R1600G Load Haul Dump Power Train Drive Shaft
R1600G Load Haul Dump Power Train Temperature Sensor (Torque Converter Oil)
R1600G Load Haul Dump Power Train Speed Sensor (Transmission Output)
TH210 and TH215 Telehandlers Power Train Hydrostatic Drive Motor - Remove
R1600 Load Haul DumpPower Train Transmission Support
R1600G Load Haul Dump Power Train Output Transfer Gears
TK711, TK721, TK722 and TK732 Track Feller Bunchers Engine Air Filter Secondary Element - Replace
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Line) - Test and Adjust
TK711, TK721, TK722 and TK732 Track Feller Bunchers Engine Air Filter Primary Element - Clean/Replace
TK711, TK721, TK722 and TK732 Track Feller Bunchers Cooling System Coolant Level - Check
R1600G Load Haul Dump Power Train Differential
R1600G Load Haul Dump Power Train Differential Pinion Preload Adjustment
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Travel System
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Piston Pump (Saw)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Felling Head System
Installation Instructions for the Machine Security System on the Small Wheel Loaders{7631} Installation Instructions for the Machine Security System on the Small Wheel Loaders{7631}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Electronic Control Module (ECM) and Personality Module (PM) - Remove and Install
533 and 543 Wheel Feller Bunchers Machine Systems Seat - Remove and Install
533 and 543 Wheel Feller Bunchers Power Train Drive Shaft (Front) - Remove and Install
C11 and C13 Engines Cylinder Head
533 and 543 Wheel Feller Bunchers Power Train Tire and Rim (Front) - Remove and Install
533 and 543 Wheel Feller Bunchers Power Train Tire and Rim (Rear) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.