3408 and 3412 High Performance Marine Engines 3E3761 Coolant Level Sensor{7422}
Usage:
3408 and 3412 High Performance Marine Engines: 3408 (8RG1-Up);
3412 (3JK1-Up)
3412 (3JK1-Up)
Installation
The 3E3761 Coolant Level Sensor is used to monitor engine coolant level and perform LOW COOLANT LEVEL diagnostics.
The 3E3761 Coolant Level Sensor is a part of the Engine Monitoring System used on 3408 and 3412 High Performance Marine Engines.
NOTE: When replacing the sensor do NOT remove plastic cover (1) from the sensor tip. The plastic cover is essential to the proper function of the sensor.
Caterpillar Information System:
Cooling Air Filter Installation For 680 And 800 Frame Generators{7263} Cooling Air Filter Installation For 680 And 800 Frame Generators{7263}
3176 Engine Timing Gear Housing Gasket Repair{1200} 3176 Engine Timing Gear Housing Gasket Repair{1200}
Replacing a Model S2B With a Model S3B Turbocharger on Certain 3176 Truck Engines{1052} Replacing a Model S2B With a Model S3B Turbocharger on Certain 3176 Truck Engines{1052}
0R-2730 and 0R-2840 Cylinder Head Installation{1100} 0R-2730 and 0R-2840 Cylinder Head Installation{1100}
Servicing Deutsch HD and DT style connectors{1408} Servicing Deutsch HD and DT style connectors{1408}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470} Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Personality Module Installation Guidelines for Bulk Hauler/Remote Applications{1902} Personality Module Installation Guidelines for Bulk Hauler/Remote Applications{1902}
Installation of 7E-6310, 9X-3294, 6N-9125, 7E-5244 and 3T-8724 Jacket Water Heater Groups{1383} Installation of 7E-6310, 9X-3294, 6N-9125, 7E-5244 and 3T-8724 Jacket Water Heater Groups{1383}
Installation Of 6N9739 Jacket Water Heater Group{1383} Installation Of 6N9739 Jacket Water Heater Group{1383}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258} 3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Replacing SR4 Generator Fault Light{4450} Replacing SR4 Generator Fault Light{4450}
INSTALLING THE 1041820 WIRING KIT{7417} INSTALLING THE 1041820 WIRING KIT{7417}
Surface Preparation and Application Procedures for 8C-8422, 1U-8846 and 4C-5300 Gasket Maker (Flexible){0648, 0649} Surface Preparation and Application Procedures for 8C-8422, 1U-8846 and 4C-5300 Gasket Maker (Flexible){0648, 0649}
Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361} Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361}
Installation and Initial Start-Up Procedures{1408} Installation and Initial Start-Up Procedures{1408}
Replacement Of Relay Module{1927} Replacement Of Relay Module{1927}
Installation of 106-5328 Conversion Arrangement For 3412 (825, 900, ; 1000 HP) Marine Engines With 9Z5359 Modification{1000, 1022} Installation of 106-5328 Conversion Arrangement For 3412 (825, 900, & 1000 HP) Marine Engines With 9Z5359 Modification{1000, 1022}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298} Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Replacing SR4 Generator Pre-Alarm Light{1404} Replacing SR4 Generator Pre-Alarm Light{1404}
Upgrading the 3176 (2YG) 325 Horsepower Truck Engine To 350 Horsepower{1902} Upgrading the 3176 (2YG) 325 Horsepower Truck Engine To 350 Horsepower{1902}
Removal Of 4P-6407 Film From The Generator Set Control (GSC) Of The Electronic Modular Control Panel II (EMCP II){4490, 7451} Removal Of 4P-6407 Film From The Generator Set Control (GSC) Of The Electronic Modular Control Panel II (EMCP II){4490, 7451}
Cleaning 3600 Unit Injectors{1290} Cleaning 3600 Unit Injectors{1290}
Upgrading The 3176 (7LG1-7499) 325 Horsepower Truck Engine To 350 Horsepower{1902} Upgrading The 3176 (7LG1-7499) 325 Horsepower Truck Engine To 350 Horsepower{1902}
Installing The 104-7618 Intake Manifold Heater{1450} Installing The 104-7618 Intake Manifold Heater{1450}