CB-434C Vibratory Compactor Caterpillar

Change the Oil

Show/hide table



Illustration 1	g00901287

1. Rotate the drum until plug (1) is at the lowest point at the bottom of the housing.

2. Place a suitable container under the fill/drain plug. Remove the fill/drain plug. Drain the housing completely.

3. Clean the fill/drain plug. Install the fill/drain plug.

Show/hide table



Illustration 2	g00901288

Show/hide table



Illustration 3	g00901290

4. Rotate the drum until welded item (2) is at the bottom of the drum. Sight gauge (3) should be at the bottom of the housing.

5. Remove fill/drain plug (1) .

6. Fill the housing with oil. Refer to the Operation and Maintenance Manual, "Lubrication Viscosities" and Operation and Maintenance Manual, "Capacities (Refill)". Maintain the level of the oil to the middle of the sight gauge.

7. Clean the plug. Install fill/drain plug (1) .