Rotor Brake - Assemble
Assembly Procedure
- Inspect all parts and clean all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Inspect all seals. Damaged seals must be replaced. Use new Caterpillar seals for replacement.
- Install two O-ring seals (16) on piston cup (15) .
Show/hide table
Illustration 1 | g00899410 |
- Install piston cup (15) in housing (2) .
Show/hide table
Illustration 2 | g00899409 |
- Install bushing (14) and two lip seals (13) in housing (2) .
- Install two O-ring seals (12) and two back up rings (11) on piston (10) .
Show/hide table
Illustration 3 | g00899407 |
- Install piston (10) in housing (2) .
Show/hide table
Illustration 4 | g00899405 |
- Install five washers (9) on piston (10) .
Show/hide table
Illustration 5 | g00899404 |
- Install seal (8) and gasket (7) on end cover (6) .
Show/hide table
Illustration 6 | g00899402 |
- Install end cover (6) and bolts (5) on housing (2) .
Show/hide table
Illustration 7 | g00899400 |
- Install adjusting nut (3) and adjusting screw (4) .
Show/hide table
Illustration 8 | g00899398 |
- Install mounting bracket (1) on housing (2) .
End By: Install the rotor brake. Refer to Disassembly and Assembly, "Rotor Brake - Install".
Caterpillar Information System:
R1700G Load Haul Dump Bucket Control Group Safety Pins
R1700G Load Haul Dump Steering Frame Lock
797B Off-Highway Truck Fuel System - Prime
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Work Tool Control
TH350B, TH360B, TH460B and TH560B Telehandlers Hydraulic System Electrical Schematic
797B Off-Highway Truck Steering System Steering Accumulator - Test and Charge
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1740 - FMI 03
797B Off-Highway Truck Fuel Tank Breather - Replace
IQAN<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Monitoring ; Control System IQAN Screen Flow Chart (A-Series Forwarder)
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers Power Train Electronic Control Module
IT28G Integrated Toolcarrier and 928G Wheel Loader Transmission Oil Pump
3126B Engine for Caterpillar Built Machines Sensors and Electrical Connectors
2002/07/01 New Single Air Conditioner Condenser Fan Motor Now Available {1805}
C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear)
R1600G Load Haul Dump Braking System Accumulator Charging Valve (Brake)
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Transmission - Assemble
CB-434C Vibratory Compactor Drum Scrapers - Inspect/Adjust/Replace
CB-434C Vibratory Compactor Eccentric Weight Housing Oil - Change
CB-434C Vibratory Compactor Eccentric Weight Housing Oil Level - Check
CB-434C Vibratory Compactor Engine Air Filter Primary Element - Clean/Replace
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers Power Train Electrical Input Components
R1700G Load Haul Dump Walk-Around Inspection
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Fuel Injector
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1740 - FMI 05