Leaving the Machine
- Inspect the engine compartment for debris. Clean any debris from the engine compartment in order to avoid a fire. Clean any paper from the engine compartment in order to avoid a fire.
- If the machine is being parked for an extended period of time, for example overnight, turn the battery disconnect switch to the OFF position.
Note: If the screed is equipped with automatic controls for the burners, allow the burners to stop turning before turning off the battery disconnect switch.
- Extend the travel locks. Lower the screed onto the travel locks. If the travel locks are not used, place the screed on the ground.
Vandal Guards
Show/hide table
Illustration 1 | g00864143 |
During paving, the vandal guard (1) for the center console is stored on the operator station on the left side. To remove the vandal guard, lift the guard and remove the guard.
Show/hide table
Illustration 2 | g00864144 |
Install the cover on the main console and lock the cover.
Show/hide table
Illustration 3 | g00864145 |
Vandal guards (1) are stored on the handrail of the left operator station and the right operator station.
Show/hide table
Illustration 4 | g00864147 |
Remove the cover from the handrail and install the cover.
Note: The cover should be locked when the machine is left or stored at all times.
Caterpillar Information System:
AP-655C and BG-2255C Asphalt Pavers Specifications
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Machine Systems Cylinder Speed - Check
2002/03/04 Fabricated Tools Are Required For The Disassembly And Assembly Of The Variable Speed Fan Drive {1359}
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System MID 082 - CID 0497 - FMI 03
AP555E and BG555E Asphalt Pavers Wheel Nuts (Final Drive) - Tighten
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Service Brake Disc Wear Indicator - Check
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Power Train Troubleshooting
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System MID 082 - CID 0562 - FMI 12
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Safety Messages - Arrangement I
554 Forwarder and 574 Forwarder Machine Systems Log Loader Pillar - Disassemble
CB-534D and CB-564D Asphalt Compactors Throttle Control
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0562 - FMI 09
AP-1055D and BG-2455D Asphalt Pavers Push Roller
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Check Valve (Fan Drive Standby Pressure)
740 EJECTOR Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Check Valve (Steering System Return)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Using Caterpillar Monitoring System to Determine Diagnostic Codes
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Differential Lock Pressure - Test
Mirrors have been Added to the Cold Planer{7319} Mirrors have been Added to the Cold Planer{7319}
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Braking System Service Brakes
3126B Engine for Caterpillar Built Machines Air Inlet Heater Circuit - Test
CB-534D and CB-564D Asphalt Compactors Seat Adjustment and Seat Belt Inspection
PM-465 Cold Planer Mirror
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Test and Charge