Belt Tensioner - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 8H-8558 | Breaker Bar | 1 |
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
- Remove four bolts (1), the washers, and the spacers.
Show/hide table
 | |
| Illustration 1 | g00748009 |
- Remove guard (2) .
- Open access door (3). Repeat this procedure for the opposite side.
Show/hide table
 | |
| Illustration 2 | g00748010 |
- Remove bolts (4) and the washers.
Show/hide table
 | |
| Illustration 3 | g00852308 |
- Remove left side baffle (5) .
- Remove bolts (6) and the washers.
Show/hide table
 | |
| Illustration 4 | g00852309 |
- Remove right side baffle (7) .
- Use Tooling (A) in order to rotate belt tensioner (8), as shown.
Show/hide table
 | |
| Illustration 5 | g00748586 |
- Remove belt (9) .
- Remove bolt (10) and the washer.
Show/hide table
 | |
| Illustration 6 | g00748587 |
- Remove belt tensioner (8) .
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 8H-8558 | Breaker Bar | 1 |
- Install belt tensioner (8) .
Show/hide table
| | |
| Illustration 7 | g00748587 |
- Install bolt (10) and the washer.
- Use Tooling (A) in order to rotate belt tensioner (8), as shown.
Show/hide table
| | |
| Illustration 8 | g00748586 |
- Install belt (9) and release Tooling (A) .
- Install right side baffle (7) .
Show/hide table
| | |
| Illustration 9 | g00852309 |
- Install bolts (6) and the washers.
- Install left side baffle (5) .
Show/hide table
| | |
| Illustration 10 | g00852308 |
- Install bolts (4) and the washers.
- Close access door (3). Repeat this procedure for the opposite side.
Show/hide table
| | |
| Illustration 11 | g00748010 |
- Install guard (2). Install four bolts (1), the washers, and the spacers.
Show/hide table
| | |
| Illustration 12 | g00748009 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Caterpillar Information System:
AP-1050B and BG-245C Asphalt Pavers Crankshaft Vibration Damper - Inspect
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Power Train Selector and Pressure Control Valve (Transmission)
HP750 Processing Head Operating Technique Information
TH103 Telehandler Steering System Pump Flow - Test
VFS50 and VFS70 Versatile Flotation System Axle Pad - Shim
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Drive Shaft (Front) - Remove and Install
793B Off-Highway Truck Air System and Brakes Control Valve (Hoist)
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Bar Guide Pins and Screws - Remove and Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Bar Guide Axle - Clean/Inspect/Replace
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Power Train Wheel Group
793B Off-Highway Truck Power Train Final Drive
RM-250C Reclaimer Mixer Circuit Breakers - Reset
VFS50 and VFS70 Versatile Flotation System Idler Bearings - Inspect/Lubricate - Later Trailers
2001/01/22 Material for Sound Suppression in the Cab is Available {7301, 7325, 7329, 7330}
VFS50 and VFS70 Versatile Flotation System Midroller Bearings - Inspect/Lubricate - Later Trailers
AP-1050B and BG-245C Asphalt Pavers Drag Conveyors - Adjust
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Power Train Torque Converter and Pump Drive Housing
RM-250C Reclaimer Mixer Cooling System Coolant (ELC) - Change
VFS50 and VFS70 Versatile Flotation System Belt - Check Alignment
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Seat - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Steering Metering Pump - Remove
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Power Train Torque Converter
RM-250C Reclaimer Mixer Propel Transmission Oil - Change
VFS50 and VFS70 Versatile Flotation System Belt - Align