Belt - Check Alignment
- Make sure that the axle pads are shimmed properly for the intended load. See Operation and Maintenance Manual, "Axle Pads - Shim" for the correct procedure.
- Pull the trailer to an area that is smooth and level.
- Pull the trailer as straight as possible for a distance of at least 15 m (50 ft).
- Stop the trailer. Place blocks at the front idler. Then place the blocks at the rear idler.
- Inspect the clearance that is between the first pair of midwheels and the outside surface of the nearest guide block that is on one belt.
- The alignment is correct if clearance exists on both sides of the nearest guide block.
- There should be clearance between both surfaces of the nearest guide block and the midwheels. If additional clearance is needed between the midwheels and the guide block, perform the procedure that is in Operation and Maintenance Manual, "Belt - Align".
- Inspect the clearance that is between the first pair of midwheels and the outside surfaces of the nearest guide block on the other belt.
- The alignment is correct if clearance exists on both sides of the nearest guide block.
- If clearance does not exist on both surfaces of the nearest guide block, perform the procedure that is in Operation and Maintenance Manual, "Belt - Align".
Caterpillar Information System:
RM-250C Reclaimer Mixer Cooling System Coolant (ELC) - Change
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Power Train Torque Converter and Pump Drive Housing
AP-1050B and BG-245C Asphalt Pavers Drag Conveyors - Adjust
VFS50 and VFS70 Versatile Flotation System Midroller Bearings - Inspect/Lubricate - Later Trailers
2001/01/22 Material for Sound Suppression in the Cab is Available {7301, 7325, 7329, 7330}
VFS50 and VFS70 Versatile Flotation System Idler Bearings - Inspect/Lubricate - Later Trailers
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Belt Tensioner - Remove and Install
AP-1050B and BG-245C Asphalt Pavers Crankshaft Vibration Damper - Inspect
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Power Train Selector and Pressure Control Valve (Transmission)
HP750 Processing Head Operating Technique Information
TH103 Telehandler Steering System Pump Flow - Test
VFS50 and VFS70 Versatile Flotation System Axle Pad - Shim
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Seat - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Steering Metering Pump - Remove
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Power Train Torque Converter
RM-250C Reclaimer Mixer Propel Transmission Oil - Change
VFS50 and VFS70 Versatile Flotation System Belt - Align
RM-250C Reclaimer Mixer Propel Transmission Oil - Check
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Pump Control Valve (Hydraulic Fan) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Steering Metering Pump - Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Rotator
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Piston Pump (Hydraulic Fan) - Remove
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Piston Pump (Hydraulic Fan) - Install
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Operator Platform - Remove