Fan Drive - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1P-0510 | 起子总成 | 1 |
| B | 1U-7094 | 扳杆 | 1 |
注: 检查所有 O 形密封圈和部件有无磨损或损坏。 如有必要，请更换部件。 利用所密封的润滑剂轻轻润滑所有 O 形密封圈。 利用不起毛的抹布擦拭所有部件。
- 将 O 形密封圈安装到隔套 (11) 中。 将滚珠轴承 (10) 和隔套 (11) 定位到风扇驱动轮毂 (1) 内。
Show/hide table
 | |
| 图 1 | g00711402 |
- 利用 1P-0808 多用途润滑脂 润滑唇形密封 (5) 。 利用工具 (A) （未显示）将唇形密封 (5) 安装到风扇驱动轮毂 (1) 中。 确保密封唇面向风扇驱动轮毂的内侧，如图所示。
- 将风扇驱动轮毂 (1) 、隔套 (9) 、滚珠轴承 (8) 和止动垫圈 (6) 定位到轴上。 安装用来固定止动垫圈的螺栓 (7) 。
- 将风扇驱动皮带轮 (3) 定位到风扇驱动轮毂 (1) 上。 安装用来固定风扇驱动皮带轮 (3) 的六条螺栓 (2) 。
- 将工具 (B) （未显示）插入凹槽 (X) 中。 利用工具 (B) 释放弹簧张力，从而可以将四条 V 形皮带 (4) 安装到风扇驱动皮带轮 (3) 上。
End By: 安装风扇。 请参阅 拆解和组装, "风扇 - 拆卸和安装"。
Caterpillar Information System:
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Air Cleaner - Remove
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Oil Filter - Replace
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Battery - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Oil - Change
IT28G Integrated Toolcarrier and 928G Wheel Loader Steering System Steering Cylinder
2000/08/07 New Screed End Gates are now Available {6640}
2000/05/22 Additional Components for the Premier Grade Control are now Available {5645, 7219, 7220}
24H Motor Grader Drawbar Ball and Socket - Lubricate
120H and 135H Motor Graders Tire Information
2000/05/22 A New Valve Core with a Higher Pressure Rating has Improved Service Life {7200}
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Position Sensor (Lift Linkage) - Adjust
143H and 163H Motor Graders Lighter
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Oil Pan - Remove
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Air Cleaner - Install
2000/07/10 A New Receptacle Provides a Reliable Connection {1408, 1431, 5258, 7301}
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Refrigerant Compressor - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic Tank Breather - Clean
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Electric Starting Motor - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Axle Housing - Assemble
TH62, TH63, TH82 and TH83 Telehandlers Pulley for Boom Extension Chain - Lubricate
3034 Engine for Caterpillar Built Machines Turbocharger - Inspect
D400E Series II Ejector Truck Ejector Blade Cutting Edge - Check/Adjust
TH62, TH63, TH82 and TH83 Telehandlers Quick Coupler - Lubricate
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Fan Drive System Brake Accumulator