Air Cleaner - Remove
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Raise the engine hood.
- Put identification marks on all wires and hoses for installation purposes.
- Disconnect wires (2) from the pumps on washer reservoir (1). Remove hoses (3) and drain the washer fluid into a suitable container.
Show/hide table
 | |
| Illustration 1 | g00711759 |
- Remove two bolts, four washers, and two nuts (4) in order to remove washer reservoir (1) .
Show/hide table
 | |
| Illustration 2 | g00711760 |
- Loosen hose clamp (5) and remove hose (6) from air cleaner (7) .
Show/hide table
 | |
| Illustration 3 | g00711761 |
- Remove two bolts, four washers, and two nuts (8) in order to remove air cleaner (7) .
Show/hide table
 | |
| Illustration 4 | g00711763 |
Caterpillar Information System:
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Oil Filter - Replace
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Battery - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Oil - Change
IT28G Integrated Toolcarrier and 928G Wheel Loader Steering System Steering Cylinder
2000/08/07 New Screed End Gates are now Available {6640}
2000/05/22 Additional Components for the Premier Grade Control are now Available {5645, 7219, 7220}
24H Motor Grader Drawbar Ball and Socket - Lubricate
120H and 135H Motor Graders Tire Information
2000/05/22 A New Valve Core with a Higher Pressure Rating has Improved Service Life {7200}
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Position Sensor (Lift Linkage) - Adjust
143H and 163H Motor Graders Lighter
24H Motor Grader Refrigerant Dryer - Replace
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Fan Drive - Install
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Oil Pan - Remove
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Air Cleaner - Install
2000/07/10 A New Receptacle Provides a Reliable Connection {1408, 1431, 5258, 7301}
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Refrigerant Compressor - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic Tank Breather - Clean
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Electric Starting Motor - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Axle Housing - Assemble
TH62, TH63, TH82 and TH83 Telehandlers Pulley for Boom Extension Chain - Lubricate
3034 Engine for Caterpillar Built Machines Turbocharger - Inspect
D400E Series II Ejector Truck Ejector Blade Cutting Edge - Check/Adjust
TH62, TH63, TH82 and TH83 Telehandlers Quick Coupler - Lubricate