Hydraulic System Oil Filter - Replace
Show/hide table
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Unlock protection cover (1) with the engine start switch key.
- Loosen hydraulic tank filler cap (2) slowly in order to relieve the pressure in the hydraulic system.
- Open the engine enclosure.
Show/hide table
Illustration 2 g00711762 Hydraulic Oil Filter - Remove the oil filter. After you remove the oil filter, discard the oil filter. The oil filter will contain oil.
- Clean the housing base for the oil filter.
- Apply a thin film of oil to the seal of the new oil filter.
- Install the new oil filter and tighten the oil filter. When the seal for the oil filter contacts the housing turn the oil filter for an additional 3/4 of a turn.
Reference: Refer to the Operation and Maintenance, "Hydraulic System Oil Level - Check" for additional information.
- Tighten filler cap (2).
- Close and lock protection cover (1).
Show/hide table
Illustration 1 | g00711757 |
Hydraulic Tank Filler Cap |
Caterpillar Information System:
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Battery - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Oil - Change
IT28G Integrated Toolcarrier and 928G Wheel Loader Steering System Steering Cylinder
2000/08/07 New Screed End Gates are now Available {6640}
2000/05/22 Additional Components for the Premier Grade Control are now Available {5645, 7219, 7220}
24H Motor Grader Drawbar Ball and Socket - Lubricate
120H and 135H Motor Graders Tire Information
2000/05/22 A New Valve Core with a Higher Pressure Rating has Improved Service Life {7200}
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Position Sensor (Lift Linkage) - Adjust
143H and 163H Motor Graders Lighter
24H Motor Grader Refrigerant Dryer - Replace
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Fan Drive System Brake Accumulator - Test and Charge
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Air Cleaner - Remove
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Fan Drive - Install
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Oil Pan - Remove
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Air Cleaner - Install
2000/07/10 A New Receptacle Provides a Reliable Connection {1408, 1431, 5258, 7301}
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Refrigerant Compressor - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic Tank Breather - Clean
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Electric Starting Motor - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Axle Housing - Assemble
TH62, TH63, TH82 and TH83 Telehandlers Pulley for Boom Extension Chain - Lubricate
3034 Engine for Caterpillar Built Machines Turbocharger - Inspect
D400E Series II Ejector Truck Ejector Blade Cutting Edge - Check/Adjust