Fuel System - Prime
Show/hide table
 |
渗漏或溅溢到热表面或电气部件上的燃油会引起失火。 当排放和/或取下燃油系统上的任何部件时,把断开开关转到关的位置。 |
燃油系统的注油泵是在机后发动机室右侧。
- 打开机器右侧的发动机检修门 (1) 。
Show/hide table
 | |
| 图 1 | g00713997 |
- 检查供油阀 (2) 是打开的。燃油供油阀是在发动机室里发动机的右侧。关闭发动机检修门 (1) 。
Show/hide table
 | |
| 图 2 | g00714002 |
- 打开机器左侧的发动机检修门 (3) 。
Show/hide table
 | |
| 图 3 | g00702996 |
- 打开在油水分离器杯上的排放阀 (5) 。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
Show/hide table
 | |
| 图 4 | g00703832 |
- 逆时针转动充油泵柱塞 (4) 以解锁充油泵柱塞 (4) 。拉出充油泵柱塞 (4) 。
- 打开注油泵柱塞 (4) 直到从排油管 (5) 中流出的燃油没有气泡。使燃油流出到适当的容器中。
注: 根据当地法规废置排放出来的液体。
- 顺时针转动充油泵柱塞 (4) 锁上充油泵柱塞 (4) 。
- 关闭排放阀 (5) 。
- 起动发动机。 观察燃油粗滤芯和燃油细滤芯周围有无漏油现象。
- 关闭发动机检修门 (3) 。
Caterpillar Information System:
24H Motor Grader Transmission Modulator Control
2000/05/01 New Rear Brake Oil Cooler Available {1365}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-8891</B> Generator through <B>5N-8911</B> Generator
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0497 - FMI 06
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Remove
120H and 135H Motor Graders Engine Air Precleaner - Clean
140H and 160H Motor Graders Engine Crankcase Breather - Clean
2000/08/28 Corrections to Service Magazine Article , "Improved Radios are Available" {7338}
12H Motor Grader Engine Crankcase Breather - Clean
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Differential - Assemble
TH103 Telehandler Radiator Screen - Clean
2000/09/25 Relieving Hydraulic Pressure in the Hydraulic System {5050}
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Burner System
2000/05/01 The Recommended Setting for the Deadband Has Been Changed in order to Reduce Movement of the Slope Control {5645, 7220}
2000/05/01 The VIMSpc99 Software Version 1.1.7a Is Now Available {7601}
140H and 160H Motor Graders Engine Oil Level - Check
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Flushing Valve (Drum Propel Motor) - Test
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 05
525B Wheel Skidder and 535B Wheel Skidder Power Train Differential Pinion Preload - Adjust
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 06
24H Motor Grader Fuel Tank Water and Sediment - Drain
140H and 160H Motor Graders Engine Oil and Filter - Change
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-9081</B> Generator through <B>5N-9432</B> Generator