The Recommended Setting for the Deadband Has Been Changed in order to Reduce Movement of the Slope Control {5645, 7220}
- Asphalt Paver:
- AP-800C (PIN: 1PM1-UP)
- BG-245C (PIN: 4XN1-UP)
- BG-225C (PIN: 5GN1-UP)
- BG-2455C (PIN: 6TN1-UP; ACM1-UP)
- AP-1050B (PIN: 6ZN1-UP)
- AP-1000B (PIN: 7HN1-UP)
- AP-1055B (PIN: 8BM1-UP; ABB1-UP)
- BG-260C (PIN: 8GN1-UP)
- BG-230 (PIN: 9AL1-UP)
- AP-650B (PIN: 9DN1-UP)
Description of Change: The recommended setting for the slope error deadband that is listed in Operation and Maintenance, KEBU7008 has changed from 0.00 to 0.05. The change reduces the movement of the slope control when the screed end gates are extended or retracted. The change will not affect the performance of the system.
Adaptable To: The change is adaptable to all the machines that are equipped with the 109-0187 Grade and Slope Control and 123-0885 Grade and Slope Control in the field.
Caterpillar Information System:
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Burner System
24H Motor Grader Fuel System - Prime
24H Motor Grader Transmission Modulator Control
2000/05/01 New Rear Brake Oil Cooler Available {1365}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-8891</B> Generator through <B>5N-8911</B> Generator
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0497 - FMI 06
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Remove
120H and 135H Motor Graders Engine Air Precleaner - Clean
140H and 160H Motor Graders Engine Crankcase Breather - Clean
2000/08/28 Corrections to Service Magazine Article , "Improved Radios are Available" {7338}
12H Motor Grader Engine Crankcase Breather - Clean
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Differential - Assemble
2000/05/01 The VIMSpc99 Software Version 1.1.7a Is Now Available {7601}
140H and 160H Motor Graders Engine Oil Level - Check
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Flushing Valve (Drum Propel Motor) - Test
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 05
525B Wheel Skidder and 535B Wheel Skidder Power Train Differential Pinion Preload - Adjust
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 06
24H Motor Grader Fuel Tank Water and Sediment - Drain
140H and 160H Motor Graders Engine Oil and Filter - Change
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-9081</B> Generator through <B>5N-9432</B> Generator
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Assemble
24H Motor Grader Fuses - Replace