Engine Crankcase Breather - Clean
发动机曲轴呼吸器是在发动机前方顶部。
- 如果发动机室装检修门，把发动机室的左侧检修门打开。
Show/hide table
 | |
| 图 1 | g00703760 |
- 把发动机曲轴箱呼吸器的出口软管夹头松开。 把发动机曲轴箱呼吸器的出口软管卸下。
Show/hide table
 | |
| 图 2 | g00109867 |
- 卸下螺栓。 把垫圈和端盖从发动机曲轴箱呼吸器卸下。
Show/hide table
 | |
| 图 3 | g00109868 |
- 检查滤清器盖密封圈的状况。 如果密封圈损坏，把老的密封圈用新的更换。
- 把发动机曲轴箱呼吸器卸下。 浸在不燃性清洁溶剂里，把发动机曲轴箱呼吸器和端盖清洗干净。
- 把发动机曲轴箱呼吸器甩干，或用压气把它吹干。
- 检查散热片有无损坏。 如果密封件损坏，则更换密封件如果软管损坏，更换软管。
- 安装发动机曲轴箱呼吸器。 安装盖。 在发动机曲轴箱呼吸器上安装垫圈和螺栓。
- 安装软管和夹头。
- 如果发动机室装有检修门，把发动机室的左侧检修门关上。
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Differential - Assemble
TH103 Telehandler Radiator Screen - Clean
2000/09/25 Relieving Hydraulic Pressure in the Hydraulic System {5050}
D400E Series II Ejector Truck Before Operating Machine
24H Motor Grader Fuel Tank Cap and Strainer - Clean
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0497 - FMI 05
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Piston Pump (Steering) - Test and Adjust
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Final Drive - Install
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Hydraulic Oil Filter
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Hydraulic Tank
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0497 - FMI 03
24H Motor Grader Fuel System Secondary Filter - Replace
2000/08/28 Corrections to Service Magazine Article , "Improved Radios are Available" {7338}
140H and 160H Motor Graders Engine Crankcase Breather - Clean
120H and 135H Motor Graders Engine Air Precleaner - Clean
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Remove
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0497 - FMI 06
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-8891</B> Generator through <B>5N-8911</B> Generator
2000/05/01 New Rear Brake Oil Cooler Available {1365}
24H Motor Grader Transmission Modulator Control
24H Motor Grader Fuel System - Prime
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Burner System
2000/05/01 The Recommended Setting for the Deadband Has Been Changed in order to Reduce Movement of the Slope Control {5645, 7220}
2000/05/01 The VIMSpc99 Software Version 1.1.7a Is Now Available {7601}