Piston Pump (Fan Drive)
Show/hide table
Illustration 1 | g00700236 |
(1) Torque for the four screws ... 20 ± 1 N·m (180 ± 10 lb in)
(2) Torque for the five bolts ... 25 ± 2 N·m (220 ± 20 lb in)
(3) Torque for the plug ... 5 ± 1.5 N·m (45 ± 15 lb in)
(4) Torque for the four bolts ... 7 ± 1 N·m (60 ± 10 lb in)
Rotation of the shaft is counterclockwise when the pump is viewed from the drive end.
Type: Variable Displacement Piston Pump
Use SAE 10W oil with an oil temperature of 65°C (150°F) to test the pump.
Pressure cutoff at zero flow ... 8300 ± 350 kPa (1200 ± 50 psi)
Test at Full Speed
- Output ... 52 ± 3 L/min (14 ± 1 US gpm)
- Pressure ... 7000 kPa (1000 psi)
- Pump speed ... 2200 rpm
- Engine speed ... 2200 rpm
- Pressure ... 7000 kPa (1000 psi)
Margin Pressure Setting
- Margin pressure ... 1100 ± 100 kPa (160 ± 15 psi)
- Output ... 26 L/min (7 US gpm)
- Pressure ... 4500 kPa (650 psi)
- Pump speed ... 2200 rpm
- Engine speed ... 2200 rpm
- Standby pressure (max) ... 2600 kPa (380 psi)
- Output ... 26 L/min (7 US gpm)
Caterpillar Information System:
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Axle (Rear)
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Steering Tank - Remove
D400E Series II Ejector Truck Transmission Control
776D and 777D Off-Highway Truck/Tractors Power Train Position Sensor (Pulled Unit Control)
2000/04/03 New Steering Shafts are Available {4301}
2000/03/27 Correction to Operation and Maintenance Manual for the Bucket/Fork Selector Control {5112, 5112}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System Load Indicator Control
D400E Series II Ejector Truck Machine Operation Information
D400E Series II Ejector Truck Engine Starting
D400E Series II Ejector Truck Machine Parking
D400E Series II Ejector Truck Suspension - Lower
D400E Series II Ejector Truck Dumping
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Steering Tank - Install
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Wheel Chock (Front and Rear) - Remove and Install
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Tire and Rim (Front) - Remove and Install
CB-535B Vibratory Compactor Propel System Piston Motor (Wheel Propel)
Installation Instructions for the 145-7099 Wedge Socket {5415, 5418} Installation Instructions for the 145-7099 Wedge Socket {5415, 5418}
2000/04/17 Guideline For Reusable Parts and Salvage Operations, SEBF8419, "Axle Housing and Final Drive Hub Salvage Procedure for 24H Motor Graders" Is Available {3260, 4054}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air Tank (Service Brake and Retarder) - Remove and Install
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Piston Pump (Axle Propel)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Suspension Cylinder Sensor - Troubleshoot
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs - Test
CB-534C and CB-634C Vibratory Compactors Propel System Piston Pump Servo Neutral - Adjust
988G Wheel Loader Power Train System Schematic