Engine Start Switch
Show/hide table
 | |
| Illustration 1 | g00691767 |
When you turn the engine start switch to the ON position, power is supplied to the machine's electrical system.
Show/hide table
| OFF (1) - When you insert the engine start switch key and when you remove the engine start switch key, the engine start switch must be in the OFF position. To disconnect the power to the electrical system, turn the engine start switch to the OFF position. Also, turn the engine start switch to the OFF position in order to stop the engine. |
Show/hide table
| ON (2) - To activate the electrical system, turn the engine start switch clockwise to the ON position. |
Show/hide table
| START (3) - To start the engine, turn the engine start switch key clockwise to the START position. When the engine start switch key is released, the engine start switch key will return to the ON position. |
Note: If the engine fails to start, return the engine start switch key to the OFF position. This must be done before you attempt to start the engine again.
Caterpillar Information System:
D400E Series II Ejector Truck Product Identification Number, Serial Number and EU's CE Plate Locations
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Transmission, Transfer Gears, and Differential - Remove
3034 Engine for Caterpillar Built Machines Piston Cooling Jet
2000/06/05 New Tire Skirt Material is Available {718T}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Check of Controller LED Indicator - Troubleshoot
CB-535B Vibratory Compactor Propel System Final Drive Planetary
2000/04/03 A New O-ring Seal for the Jacket Water Heater Provides Improved Service Life {1383}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Harness and Wire Identification
3034 Engine for Caterpillar Built Machines Flywheel Housing
D400E Series II Ejector Truck Safety Signs and Labels
D400E Series II Ejector Truck Caterpillar Monitoring System
2000/04/17 New 160-1728 Differential Bracket Assembly Adapter Provides Support on the Differential Carrier {0717, 3258}
D400E Series II Ejector Truck Hazard Flasher Control
2000/04/24 A 3E-6510 Film with White Letters Is Now Available as a Replacement for 9X-1729 Film . {7557}
D400E Series II Ejector Truck Model View Illustrations
D400E Series II Ejector Truck Heating and Air Conditioning Control
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System Display Module
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0767 FMI 03 Pressure Sensor (Fixed Displacement Pump Oil) Voltage Above Normal - Test
D400E Series II Ejector Truck Indicators
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0767 FMI 04 Pressure Sensor (Fixed Displacement Pump Oil) Voltage Below Normal - Test
797 Off-Highway Truck Braking System Pressure Reducing Valve (Pilot Oil)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0767 FMI 06 Pressure Sensor (Fixed Displacement Pump Oil) Current Above Normal - Test
2000/03/27 Adjustment Procedure for Governor Control Linkage {1265}