D400E Series II Ejector Truck Caterpillar


Product Identification Number, Serial Number and EU's CE Plate Locations

Usage:

D400E II APF
The Product Identification Number (PIN) is used to identify a powered machine that is designed for an operator to ride.

Caterpillar products such as engines, transmissions and major attachments that are not designed for an operator to ride are identified by Serial Numbers.

For quick reference, record the identification numbers in the spaces that are provided below the illustrations.




Illustration 1g00691762

The PIN plate for this machine is located at the bottom rear of the front frame. The PIN plate gives the following information.

Machine Model Number ____________________

Product Identification Number (PIN) ____________________




Illustration 2g00691768

The Service Information Number Plate is located behind the seat in the cab. The Service Information Number Plate gives the following information.

Machine Model Number ____________________

Machine Pin ____________________

Machine Arrangement Number ____________________

Engine Model ____________________

Engine Serial Number ____________________

Engine Arrangement Number ____________________

Transmission Serial Number ____________________

Transmission Arrangement Number ____________________

Year of Manufacture ____________________

The plate for Product Identification and the plate for Service Information have a space that is marked "Parts Order". The letter "Z" is stamped in this space if the machine is equipped with a custom shop modification. The year of manufacture is stamped between the machine arrangement number and the engine arrangement number.

"EU" Mark




Illustration 3g00691772



Illustration 4g00591408

Note: This CE plate is installed on machines that are shipped to countries that are in the European Community. The CE plate is located on the outside of the cab. The CE plate gives the following information.

  • PIN____________________

  • Machine model____________________

  • Engine power (kW)____________________

  • Machine weight (kg)____________________

Emissions Certification Film

The Emissions Certification Film is located on the engine. The location of this film will vary.




Illustration 5g00638668

Typical Example




Illustration 6g00638373

Typical Example (French)

Caterpillar Information System:

3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Transmission, Transfer Gears, and Differential - Remove
3034 Engine for Caterpillar Built Machines Piston Cooling Jet
2000/06/05 New Tire Skirt Material is Available {718T}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Check of Controller LED Indicator - Troubleshoot
CB-535B Vibratory Compactor Propel System Final Drive Planetary
2000/04/03 A New O-ring Seal for the Jacket Water Heater Provides Improved Service Life {1383}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Harness and Wire Identification
3034 Engine for Caterpillar Built Machines Flywheel Housing
D400E Series II Ejector Truck Safety Signs and Labels
D400E Series II Ejector Truck Caterpillar Monitoring System
D400E Series II Ejector Truck Differential Lock Control
D400E Series II Ejector Truck Engine Start Switch
2000/04/17 New 160-1728 Differential Bracket Assembly Adapter Provides Support on the Differential Carrier {0717, 3258}
D400E Series II Ejector Truck Hazard Flasher Control
2000/04/24 A 3E-6510 Film with White Letters Is Now Available as a Replacement for 9X-1729 Film . {7557}
D400E Series II Ejector Truck Model View Illustrations
D400E Series II Ejector Truck Heating and Air Conditioning Control
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System Display Module
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0767 FMI 03 Pressure Sensor (Fixed Displacement Pump Oil) Voltage Above Normal - Test
D400E Series II Ejector Truck Indicators
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0767 FMI 04 Pressure Sensor (Fixed Displacement Pump Oil) Voltage Below Normal - Test
797 Off-Highway Truck Braking System Pressure Reducing Valve (Pilot Oil)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0767 FMI 06 Pressure Sensor (Fixed Displacement Pump Oil) Current Above Normal - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.