Gear Pump
Show/hide table
 | |
| Illustration 1 | g00664968 |
The gear pump (1) is located on the front of the front housing cover (2). The gear pump is driven by an external spline. The gear pump connects to the auxiliary pump drive (3). The auxiliary pump drive is driven by the timing gears. The timing gears are located inside the front housing cover (2). The timing gears turn in direct relation to the engine rpm. As the engine rpm increases, the rate of flow from the gear pump increases.
The hydraulic oil tank is above the gear pump. Oil flows from the tank to the gear pump. The oil inlet (4) is on the top of the pump. A fill port is on top of the oil inlet. The oil outlet is on the bottom of the gear pump. The oil flows from the gear pump to the fan motor.
Caterpillar Information System:
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Capacities (Refill)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Sampling Interval and Location of Sampling Valve
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Parking Brake Manual Release
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Machine Tiedown Information
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Stopping the Machine
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Starting to Pave
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Before Receiving the First Load of Asphalt
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Screed Heating
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Screed Adjustment
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Machine Controls
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Changing Speed and Direction
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Engine and Machine Warm-Up
1999/12/20 Three Special Instructions are now Available for Installing Auxiliary Lines Kits {5057}
1999/12/20 Removal of the Bumpers for the Steering Levers Improves Lever Calibration {4106}
572R Pipelayer Power Train Power Train Oil Screen - Remove and Install
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 04 Engine Oil Pressure short to ground
2000/01/10 The VIMSpc99 Version 1.1.5 Software Update Is Now Available {7601}
2000/01/10 New Maintenance Interval Schedule and Procedure for Checking the Oil Level in the Midwheel Hub {4180, 7526}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Brake Cylinder (Boost)
2000/03/06 A New Retainer Ring in The Piston Motor Prevents The Clips from Becoming Dislodged During Operation {5058}
228 and 248 Skid Steer Loaders Machine Systems Piston Pump (Hydrostatic)
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Fan Drive Speed - Test and Adjust
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
228 and 248 Skid Steer Loaders Machine Systems Piston Motor (Hydrostatic)