2000/01/03 Caterpillar


Locations Where New Tube Assemblies Are Used {1274}

Usage:

793B 1HL
Off-Highway Truck/Tractor:
776C (PIN: 2TK1-UP)
777C (PIN: 4XJ1-UP)
784B (PIN: 5RK1-UP)
785B (PIN: 6HK1-UP)
789B (PIN: 7EK1-UP)
793B (PIN: 1HL1-UP)
Excavator:
5130 FS ME (PIN: 5ZL1-UP)
5130 FS HC TT (PIN: 7TJ1-UP)
5230 (PIN: 7LL1-UP)
Service Magazine SEPD0239, 16 January 1995, "New Tube Assemblies Used In Fuel Lines Groups". Disregard this article. The article has been replaced by the following article:

Description of Change: Two new tube assemblies are used in the fuel lines groups in the 3500 Engines for the above machines.The new routing of the new tube assemblies helps protect the tube assemblies from being stepped on. The new tube assemblies are routed to the inside of the outlet tube for the separate circuit aftercooler pump. The new tube assemblies have more bends which resulted in increased stiffness. The added stiffness and increased protection will help to increase the service life of the new tube assemblies.

Adaptable To: The new 112-5993 Tube Assembly is a direct replacement for the 2W-0593 Tube Assembly. The new 112-5992 Tube Assembly is a direct replacement for the 4P-7389 Tube Assembly. The table shows the engine arrangements and the fuel lines groups which are affected by this improvement.




Illustration 1g00665038

LEFT SIDE VIEW OF ENGINE

This illustration shows a typical fuel lines group. (1) 112-5992 Tube Assembly. (2) 112-5993 Tube Assembly.

Table 1
New Tube Assemblies For 3500 Engine Arrangements    
Machine Model     Engine Model     Fuel Lines Group Part Number     Engine Arrangement Number    
776C     3508     7E-9213     7E-9078    
777C     3508     7E-9213     7E-9078    
784B     3512     7E-9214     7E-9079    
785B     3512     7E-9214     7E-9079    
789B     3516     7E-9215     7E-9080    
793B     3516     7E-6503     7E-6499    
5130     3508     7E-0957     6I-2758    
5230     3516     7E-6503     100-6339    

Caterpillar Information System:

2000/02/21 New Air Cleaner Support and Exhaust Tube Bracket Available for 24H Motor Grader, D10R Track-Type Tractor, and the 651E and 657E Wheel Tractor Scrapers {1051, 1061}
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Towing Hitch System - If Equipped
1999/12/20 Change to Tightening Procedure for Cylinder Head Bolts in Specifications, RENR1217 and Specifications, SENR5182 {1100}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Service Brake Air - Purge
3054B Industrial Engine Engine Oil Filter Base - Disassemble
3054B Industrial Engine Engine Oil Filter Base - Install
3054B Industrial Engine Engine Oil Filter Base - Remove
CB-535B Vibratory Compactor Drum Offset Control
CB-535B Vibratory Compactor Engine Water Pump - Inspect
CB-535B Vibratory Compactor Engine Valve Lash - Check
CB-535B Vibratory Compactor Engine Oil and Filter - Change
CB-535B Vibratory Compactor Engine Oil Sample - Obtain
2000/02/07 New Procedure to Test DASA 280C on Excavators With the HH65 Harvester Head {7610, 7620}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0261 FMI 13 Engine Timing Calibration required
988G Wheel Loader Power Train NoSPIN Differential
554 and 574 Forwarders Power Train Oil Level Sensor (Power Train Oil Tank)
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0001 FMI 05 Cylinder #1 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0001 FMI 06 Cylinder #1 Injector short
988G Wheel Loader Power Train Differential and Bevel Gear
2000/02/14 A New Bolt is Used to Secure the Deflector Plate Behind the Measuring Arm {6320}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0002 FMI 05 Cylinder #2 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0003 FMI 05 Cylinder #3 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0004 FMI 05 Cylinder #4 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0005 FMI 05 Cylinder #5 Injector open circuit
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.