3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Caterpillar


CID 0001 FMI 05 Cylinder #1 Injector open circuit

Usage:

988G 2TW
Kondisi-kondisi yang mendorong penciptaan kode ini:

Modul Kontrol Elektronik (ECM, Electronic Control Module) mencoba mengoperasikan injektor. ECM mendeteksi sirkuit terbuka di sirkuit untuk injektor.

Tanggapan:

ECM akan mencatat kode diagnostik. ECM akan terus mencoba mengoperasikan injektor setelah kode tercatat.

Kemungkinan Akibat Perlaksanaan:

  • Engine mengalami salah pengapian

  • Daya rendah

Pemecahan Masalah:

Langkah Pengujian" status="1 1. Laksanakan, Prosedur Pemeriksaan berikut: "Sirkuit Solenoid Injektor - Pengujian"

Hasil:

  • OK - BERHENTI

Caterpillar Information System:

554 and 574 Forwarders Power Train Oil Level Sensor (Power Train Oil Tank)
988G Wheel Loader Power Train NoSPIN Differential
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0261 FMI 13 Engine Timing Calibration required
2000/02/07 New Procedure to Test DASA 280C on Excavators With the HH65 Harvester Head {7610, 7620}
2000/01/03 Locations Where New Tube Assemblies Are Used {1274}
2000/02/21 New Air Cleaner Support and Exhaust Tube Bracket Available for 24H Motor Grader, D10R Track-Type Tractor, and the 651E and 657E Wheel Tractor Scrapers {1051, 1061}
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Towing Hitch System - If Equipped
1999/12/20 Change to Tightening Procedure for Cylinder Head Bolts in Specifications, RENR1217 and Specifications, SENR5182 {1100}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Service Brake Air - Purge
3054B Industrial Engine Engine Oil Filter Base - Disassemble
3054B Industrial Engine Engine Oil Filter Base - Install
3054B Industrial Engine Engine Oil Filter Base - Remove
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0001 FMI 06 Cylinder #1 Injector short
988G Wheel Loader Power Train Differential and Bevel Gear
2000/02/14 A New Bolt is Used to Secure the Deflector Plate Behind the Measuring Arm {6320}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0002 FMI 05 Cylinder #2 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0003 FMI 05 Cylinder #3 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0004 FMI 05 Cylinder #4 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0005 FMI 05 Cylinder #5 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0006 FMI 05 Cylinder #6 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines CID 0009 FMI 05 Cylinder #9 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines CID 0010 FMI 05 Cylinder #10 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines CID 0011 FMI 05 Cylinder #11 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines CID 0012 FMI 05 Cylinder #12 Injector open circuit
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.