Fire Extinguisher Location
The fire extinguisher should be mounted in a location on the platform. This is the recommended location. Do not weld the ROPS in order to install the fire extinguisher. Also, do not drill holes in the ROPS in order to mount the fire extinguisher on the ROPS.
If the fire extinguisher is mounted on the ROPS, strap the mounting plate to a leg of the ROPS. If the weight of the fire extinguisher is more than 4.5 kg (10 lb), mount the fire extinguisher as low as possible on one leg. Do not mount the fire extinguisher on the upper one-third area of the leg.
Caterpillar Information System:
1999/12/06 The Operation of the Transmission After Applying the Parking Brake {3030, 4267}
CB-535B Vibratory Compactor Fire Prevention and Explosion Prevention
CB-535B Vibratory Compactor Burn Prevention
D250E and D300E Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder
572R Pipelayer Machine Systems Governor and Brake Control - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
CB-535B Vibratory Compactor Crushing Prevention and Cutting Prevention
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Diameter Sensor
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Length Sensor
554 and 574 Forwarders Power Train Combination Valve (Differential Lock and Parking Brake)
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Saw Bar Position Sensor
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Saw Bar Home Sensor
D250E and D300E Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder
572R Pipelayer Machine Systems Governor and Brake Control - Install
D250E Series II and D300E Series II Articulated Trucks Service Light Power Receptacle
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C-12, C-15 and C-16 Engines for Caterpillar Built Machines Excessive Engine Oil Consumption
572R Pipelayer Machine Systems Governor and Brake Control - Disassemble
CB-535B Vibratory Compactor Electrical Storm Injury Prevention
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Check of Electronic Control Module Using Signal Generator and Counter
D250E and D300E Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Suspension Cylinder (Front)
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Compensating System
2000/03/06 Special Instruction, REHS0606 Is Available For The Procedure To Retrofit 159-1801 Primary Fuel Filter Gp {1260, 1261}