Governor and Brake Control - Remove
Removal Procedure
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
- Disconnect two electrical connectors (1) .
Show/hide table
 | |
| Illustration 1 | g00659208 |
- Remove three bolts (2) and the washers. Remove cover (3) .
Show/hide table
 | |
| Illustration 2 | g00659216 |
- Remove three bolts (5) and the washers from cover (4). Remove the cover.
Show/hide table
 | |
| Illustration 3 | g00659217 |
- Disconnect three electrical connectors (6) .
Show/hide table
 | |
| Illustration 4 | g00659218 |
- Remove nut (7). Remove the rod from the bellcrank.
Show/hide table
 | |
| Illustration 5 | g00659219 |
- Remove four bolts (9) and the washers. Remove cover (8) and the spacer.
Show/hide table
 | |
| Illustration 6 | g00659221 |
- Remove two bolts (11) and the washers. Remove plate (10) .
Show/hide table
 | |
| Illustration 7 | g00659222 |
- Remove four bolts (13). Remove the governor and decelerator (12) .
Show/hide table
 | |
| Illustration 8 | g00659224 |
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
CB-535B Vibratory Compactor Crushing Prevention and Cutting Prevention
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Diameter Sensor
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Length Sensor
554 and 574 Forwarders Power Train Combination Valve (Differential Lock and Parking Brake)
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Saw Bar Position Sensor
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Saw Bar Home Sensor
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Position Sensor (Brake Pedal) - Test and Adjust
D250E and D300E Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Suspension Accumulator
D350E and D400E Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Suspension Cylinder (Rear)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Harness (Speed Potentiometer) and Electronic Sensor - Test
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Lever (Propel Control) and Electronic Sensor - Test
D250E and D300E Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder
CB-535B Vibratory Compactor Burn Prevention
CB-535B Vibratory Compactor Fire Prevention and Explosion Prevention
1999/12/06 The Operation of the Transmission After Applying the Parking Brake {3030, 4267}
CB-535B Vibratory Compactor Fire Extinguisher Location
D250E and D300E Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder
572R Pipelayer Machine Systems Governor and Brake Control - Install
D250E Series II and D300E Series II Articulated Trucks Service Light Power Receptacle
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C-12, C-15 and C-16 Engines for Caterpillar Built Machines Excessive Engine Oil Consumption
572R Pipelayer Machine Systems Governor and Brake Control - Disassemble
CB-535B Vibratory Compactor Electrical Storm Injury Prevention