PRODUCT SUPPORT PROGRAM FOR REPLACING THE 200-2282 FAN DRIVE BEARING ON CERTAIN INDUSTRIAL ENGINES
Usage:
REBE2841-00
Show/hide table
| 12Dec2007 |
U-646
A-525
D-527
O-564
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING THE 200-2282 FAN DRIVE BEARING ON CERTAIN INDUSTRIAL ENGINES |
|
| 1359 | PS42577 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42577" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Dec2009 |
PROBLEM
Show/hide table
| The existing 200-2282 Fan Drive Bearing can seize, crack, or otherwise fail on certain Industrial Engines. If the existing bearing fails, it should be replaced by the 3079798/">307-9798 Bearing. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C9 | JLW00100-00219, 228, 261-422, 425, 428, 430-432, 442-444, 457-808, 813-1014 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 3079798 | BEARING AS. |
| In Order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 9% of dealership population. This is an inital order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Replace the bearing as shown in Image1. Refer to RENR7460 as necessary for disassembly and assembly instructions. |
Show/hide table
|
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-48 mo |
||||||
49-54 mo |
||||||
55-60 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING OIL FILL TUBES ON CERTAIN C7 AND C9 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING OIL FILL TUBES ON CERTAIN C7 AND C9 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW FUEL LINE BRACKET AND BRACKET AS. ON CERTAIN G3520C ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW FUEL LINE BRACKET AND BRACKET AS. ON CERTAIN G3520C ENGINES.
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN C7 2007 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN C7 2007 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE PRELUBE CIRCUIT ON 3516B, 3516C, AND 3512C ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE PRELUBE CIRCUIT ON 3516B, 3516C, AND 3512C ENGINES
PRODUCT SUPPORT PROGRAM FOR REROUTING THE INLET HOSE FOR THE PURGE AIR PUMP AND INSPECTING THE AIR COMPRESSOR ON CERTAIN 2007 C15 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REROUTING THE INLET HOSE FOR THE PURGE AIR PUMP AND INSPECTING THE AIR COMPRESSOR ON CERTAIN 2007 C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING HARNESS WIRE IN PM1000 POWER MODULES, ADDING FUEL CONTROL PANEL RELAY, AND ISOLATING CIRCUIT BREAKER SHUNT TRIP WIRING PRODUCT SUPPORT PROGRAM FOR REPLACING HARNESS WIRE IN PM1000 POWER MODULES, ADDING FUEL CONTROL PANEL RELAY, AND ISOLATING CIRCUIT BREAKER SHUNT TRIP WIRING
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUCTION PIPE ON CERTAIN SMALL WHEEL LOADERS, VIBRATORY SOIL COMPACTORS, AND 3056 AND 3056E INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUCTION PIPE ON CERTAIN SMALL WHEEL LOADERS, VIBRATORY SOIL COMPACTORS, AND 3056 AND 3056E INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RESISTOR HARNESS P/N 252-7455 ON CERTAIN 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, C175-16, C32, AND PMC32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE RESISTOR HARNESS P/N 252-7455 ON CERTAIN 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, C175-16, C32, AND PMC32 GENERATOR SETS
RECALL PROGRAM FOR INSPECTING AND REPLACING THE OIL FILLER CAP ON C11/C13 TRUCK ENGINES IN CERTAIN KENWORTH 2005-2007 T600 AND T800 CHASSIS RECALL PROGRAM FOR INSPECTING AND REPLACING THE OIL FILLER CAP ON C11/C13 TRUCK ENGINES IN CERTAIN KENWORTH 2005-2007 T600 AND T800 CHASSIS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FUEL INJECTION PUMPS ON CERTAIN C7/C9 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FUEL INJECTION PUMPS ON CERTAIN C7/C9 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN 120, 150, 250, 300, 301, 500, 600, 750, AND 900 MODEL UNINTERRUPTIBLE POWER SYSTEMS (UPS) PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN 120, 150, 250, 300, 301, 500, 600, 750, AND 900 MODEL UNINTERRUPTIBLE POWER SYSTEMS (UPS)
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS AND IN SOME CASES VARIABLE VALVE ACTUATOR (VVA) STUDS ON CERTAIN MXS AND NXS C15 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS AND IN SOME CASES VARIABLE VALVE ACTUATOR (VVA) STUDS ON CERTAIN MXS AND NXS C15 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED AFTERCOOLER AND SEPARATE CIRCUIT AFTERCOOLER SYSTEM ON CERTAIN 3406E MARINE ENGINES OWNED BY NEW YORK WATERWAYS PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED AFTERCOOLER AND SEPARATE CIRCUIT AFTERCOOLER SYSTEM ON CERTAIN 3406E MARINE ENGINES OWNED BY NEW YORK WATERWAYS
PRODUCT SUPPORT PROGRAM FOR REPLACING TRIP UNIT ON CERTAIN CIRCUIT BREAKERS INSTALLED ON 3512, 3516, 3516B, AND 3516C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING TRIP UNIT ON CERTAIN CIRCUIT BREAKERS INSTALLED ON 3512, 3516, 3516B, AND 3516C GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW FLASH FILE IN THE ADVISOR AND INSTALLING NEW NOX SENSORS ON CERTAIN G3508, G3512, AND G3516 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW FLASH FILE IN THE ADVISOR AND INSTALLING NEW NOX SENSORS ON CERTAIN G3508, G3512, AND G3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REROUTING THE INLET HOSE FOR THE PURGE AIR PUMP AND INSPECTING THE AIR COMPRESSOR ON CERTAIN 2007 C13 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REROUTING THE INLET HOSE FOR THE PURGE AIR PUMP AND INSPECTING THE AIR COMPRESSOR ON CERTAIN 2007 C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COOLANT TUBES AND ADDING SPACERS UNDER THE SEA WATER TUBES ON CERTAIN 3508, 3508B, 3512B, 3516B, AND G3516B MARINE ENGINES WITH FRONT MOUNTED HEAT EXCHANGERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN 2007 C9 ON-HIGHWAY TRUCK ENGINES INSTALLED IN RECREATIONAL VEHICLE AND FIRE TRUCK CHASSIS PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN 2007 C9 ON-HIGHWAY TRUCK ENGINES INSTALLED IN RECREATIONAL VEHICLE AND FIRE TRUCK CHASSIS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE REAR GEAR ASSEMBLY ON CERTAIN C11 AND C13 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE REAR GEAR ASSEMBLY ON CERTAIN C11 AND C13 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 197-6700 PISTONS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 197-6700 PISTONS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TERMINAL BOXES LOCATED ON THE GENERATOR AND REWORKING THE SUPPORTS ON THE RADIATOR ON CERTAIN 3516C-HD GENSETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TERMINAL BOXES LOCATED ON THE GENERATOR AND REWORKING THE SUPPORTS ON THE RADIATOR ON CERTAIN 3516C-HD GENSETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN C9 MARINE GENSET ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN C9 MARINE GENSET ENGINES
PRODUCT SUPPORT PROGRAM FOR REFLASHING THE ENGINE SOFTWARE ON CERTAIN PM32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REFLASHING THE ENGINE SOFTWARE ON CERTAIN PM32 GENERATOR SETS