Water Pump - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Loosen the bolts for the alternator and slide the alternator toward the engine in order to remove the V-belt from the engine.
- Drain the coolant from the cooling system into a suitable container for storage or disposal.
- Loosen the hose clamp and remove hose (1) from water pump (3) .
Show/hide table
Illustration 1 | g00597853 |
- Remove nuts (2) that fasten water pump (3) to the engine.
- Remove water pump (3) from the engine.
Show/hide table
Illustration 2 | g00594031 |
- Remove spacer (5) from the engine.
Show/hide table
Illustration 3 | g00594033 |
Caterpillar Information System:
3524B and C175 Engines for Off-Highway Truck/Tractors Engine Design
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes
TH62, TH63, TH82 and TH83 Telehandlers Before Starting Engine
797 Off-Highway Truck Braking System Gear Pump (Brake Cooling)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System Using Electronic Control Analyzer Programmer (ECAP) to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System Using the Diagnostic Indicator to Determine Diagnostic Codes
539 Knuckleboom Loader Machine Systems Selector Valve (Hydraulic Lever Lock Control) - Assemble
539 Knuckleboom Loader Machine Systems Selector Valve (Hydraulic Lever Lock Control) - Disassemble
539 Knuckleboom Loader Machine Systems Selector Valve (Hydraulic Lever Lock Control) - Install
539 Knuckleboom Loader Machine Systems Selector Valve (Hydraulic Lever Lock Control) - Remove
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Auxiliary System Manifold Valve (Screed Counterbalance)
797 Off-Highway Truck Fan Drive Hydraulic System Speed Sensor (Fan Drive)
797 and 797B Off-Highway Truck Power Train Electronic Control System Data Link
789C Off-Highway Truck Engine Supplement Engine and Torque Converter - Install
797 and 797B Off-Highway Truck Power Train Electronic Control System Sensors
Dimensions for Articulated Hitches, Lift Arms, Front Levers and Rear Levers, Oscillating Rear Axle Assemblies, Buckets, and Forks{0677, 0679, 3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100} Dimensions for Articulated Hitches, Lift Arms, Front Levers and Rear Levers, Oscillating Rear Axle Assemblies, Buckets, and Forks{0677, 0679, 3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100}
797 Off-Highway Truck Fan Drive Hydraulic System Piston Pump (Fan Drive)
539 Knuckleboom Loader Machine Systems Stabilizer Cylinder - Remove and Install
3034 Engine for Caterpillar Built Machines Water Pump - Install
D350E Series II and D400E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems General Information
120H and 135H Motor Graders Hydraulic and Steering System Accumulator (Steering)
3034 Engine for Caterpillar Built Machines Cylinder Head - Remove
D400E Series II Articulated Truck Power Train Transmission Hydraulic Control Valve - Remove
D400E Series II Articulated Truck Power Train Transmission Hydraulic Control Valve - Install