539 Knuckleboom Loader Machine Systems Caterpillar


Selector Valve (Hydraulic Lever Lock Control) - Disassemble

Usage:

539 1PZ

Disassembly Procedure

Start By:

  1. Remove the selector valve. Refer to Disassembly and Assembly, "Selector Valve (Hydraulic Lever Lock Control) - Remove" for the machine that is being serviced.

  1. Put identification marks on all of the hydraulic fittings in the valve body for assembly purposes. Remove the hydraulic fittings from the valve body.



    Illustration 1g00643553

  1. Remove two bolts (1) and solenoid valve (2) from the valve body.



    Illustration 2g00643557

  1. Remove four O-ring seals (3) from solenoid valve (2) .



    Illustration 3g00643569

  1. Remove two bolts (4) and cover (5) from the valve body.



    Illustration 4g00643574

  1. Remove spring (8) and spool (7) from the valve body. Remove O-ring seal (6) from cover (5) .



    Illustration 5g00643577

  1. Remove two bolts (9) and cover plate (10) from the valve body.



    Illustration 6g00643578

  1. Remove O-ring seal (11) from the valve body.



    Illustration 7g00643580

  1. Remove plug (12) from the valve body.



    Illustration 8g00643586

  1. Remove O-ring seal (13) from plug (12) .

Caterpillar Information System:

539 Knuckleboom Loader Machine Systems Selector Valve (Hydraulic Lever Lock Control) - Install
539 Knuckleboom Loader Machine Systems Selector Valve (Hydraulic Lever Lock Control) - Remove
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Auxiliary System Manifold Valve (Screed Counterbalance)
797 Off-Highway Truck Fan Drive Hydraulic System Speed Sensor (Fan Drive)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System Initial Troubleshooting Procedure
3408E and 3412E Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System Electrical Components And Connector Locations
797 Off-Highway Truck Braking System Towing
Challenger 65C, Challenger 65D, Challenger 65E, Challenger 70C, Challenger 75C, Challenger 75D, Challenger 75E, Challenger 85C, Challenger 85D, Challenger 85E and Challenger 95E Agricultural Tractors Machine Performance Panel Modes of Operation
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System Service Tools
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System General Information
3054 and 3056 Industrial and Generator Set Engines Water Temperature Regulator Housing
539 Knuckleboom Loader Machine Systems Selector Valve (Hydraulic Lever Lock Control) - Assemble
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System Using the Diagnostic Indicator to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System Using Electronic Control Analyzer Programmer (ECAP) to Determine Diagnostic Codes
797 Off-Highway Truck Braking System Gear Pump (Brake Cooling)
TH62, TH63, TH82 and TH83 Telehandlers Before Starting Engine
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes
3524B and C175 Engines for Off-Highway Truck/Tractors Engine Design
3034 Engine for Caterpillar Built Machines Water Pump - Remove
797 and 797B Off-Highway Truck Power Train Electronic Control System Data Link
789C Off-Highway Truck Engine Supplement Engine and Torque Converter - Install
797 and 797B Off-Highway Truck Power Train Electronic Control System Sensors
Dimensions for Articulated Hitches, Lift Arms, Front Levers and Rear Levers, Oscillating Rear Axle Assemblies, Buckets, and Forks{0677, 0679, 3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100} Dimensions for Articulated Hitches, Lift Arms, Front Levers and Rear Levers, Oscillating Rear Axle Assemblies, Buckets, and Forks{0677, 0679, 3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.