Hitch (Lift Arm) - Remove and Install
Removal Procedure
Start By:
- Remove the lift link. Refer to Disassembly and Assembly, "Hitch (Lift Link) - Remove and Install" for the machine that is being serviced.
- Remove the bolt, the washer and spacer (1). Position sensor linkage (2) out of the way.
Show/hide table
Illustration 1 | g00572944 |
- Remove the bolt, washer (3), and washer (4) from both lifting arms.
Show/hide table
Illustration 2 | g00572947 |
- Fasten a suitable lifting device to the lifting arms. Remove the bolt, the washer and spacer (5). Remove pin (6) .
Show/hide table
Illustration 3 | g00572950 |
- Raise the lifting arms enough to clear hitch cylinders (7). Place a wood block under the lifting arm that is not being removed.
Show/hide table
Illustration 4 | g00572951 |
- Mark the location of lifting arm (8) and shaft (9) for installation purposes. Attach a suitable lifting device to the lifting arm and remove the lifting arm. The weight of the lifting arm is 45 kg (98 lb).
Show/hide table
Illustration 5 | g00572952 |
Installation Procedure
- Attach a suitable lifting device to the lifting arm and install the lifting arm. The weight of the lifting arm is 45 kg (98 lb). Install the lifting arm. Use the marks on the lifting arm (8) and shaft (9) .
Show/hide table
Illustration 6 | g00572952 |
- Raise the lifting arms enough to clear hitch cylinders (7). Remove the wood block under the lifting arm that is not being removed.
Show/hide table
Illustration 7 | g00572951 |
- Fasten a suitable lifting device to the lifting arms. Install pin (6). Install the bolt, the washer and spacer (5).
Show/hide table
Illustration 8 | g00572950 |
- Install the bolt, washer (3), and washer (4) on both lifting arms.
Show/hide table
Illustration 9 | g00572947 |
- Reposition sensor linkage (2). Install the bolt, the washer and spacer (1) .
Show/hide table
Illustration 10 | g00572944 |
End By: Install the lift links. Refer to Disassembly and Assembly, "Hitch (Lift Links) - Remove and Install" for the machine that is being serviced.
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Steering Control - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Steering Control - Remove
Challenger 65C, Challenger 65D, Challenger 65E, Challenger 70C, Challenger 75C, Challenger 75D, Challenger 75E, Challenger 85C, Challenger 85D, Challenger 85E and Challenger 95E Agricultural Tractors Machine Performance Panel Speed Sensor (Engine)
554 Forwarder and 574 Forwarder Lubricant Viscosities
797 Off-Highway Truck Steering System Relief Valve (Steering) - Test and Adjust - Backup Relief Valve
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines ETR Junction Box-Switchgear Not Required (OP,WT)
Weld Repair Procedure for Field Retrofit of Large Off-Highway Truck Frame Superstructure {7050, 7253} Weld Repair Procedure for Field Retrofit of Large Off-Highway Truck Frame Superstructure {7050, 7253}
797 Off-Highway Truck Engine Supplement Muffler - Remove
D350E Series II and D400E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Tailgate Cylinder - Test
789C Off-Highway Truck Engine Supplement Cowling (Radiator) - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Fault Codes
3524B and C175 Engines for Off-Highway Truck/Tractors Accessory Drive
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Hitch (Lift Link) - Remove and Install
3524B and C175 Engines for Off-Highway Truck/Tractors Flywheel
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Hitch (Lower Link) - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Hitch Cylinder - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Hitch Cylinder - Disassemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Hitch Cylinder - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Hitch Cylinder - Remove
Challenger 65C, Challenger 65D, Challenger 65E, Challenger 70C, Challenger 75C, Challenger 75D, Challenger 75E, Challenger 85C, Challenger 85D, Challenger 85E and Challenger 95E Agricultural Tractors Machine Performance Panel Speed Sensor (Transmission)
Challenger 65C, Challenger 65D, Challenger 65E, Challenger 70C, Challenger 75C, Challenger 75D, Challenger 75E, Challenger 85C, Challenger 85D, Challenger 85E and Challenger 95E Agricultural Tractors Machine Performance Panel Speed Sensor (Ground)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Hydraulic Tank
Procedure for Field Installation of 43 GPM Implement Pump{5084} Procedure for Field Installation of 43 GPM Implement Pump{5084}
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines ETR Introduction