D400E Series II Articulated Truck Caterpillar


Steering Check and Combiner Valve - Install

Usage:

D400E II 8PS

Installation Procedure

  1. Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.

  2. Lubricate O-ring seals with an appropriate lubricant.


    Illustration 1g00567019

  3. Place steering check and combiner valve (4) into position. Install two bolts (6) and the washers that secure the valve to the mounting bracket.

  4. Install the two O-rings and connect two hoses (5) to valve (4).

  5. Install three O-rings and place three hose assemblies (3) into position. Install six half clamps (2), 12 bolts (1), and the washers that secure the oil lines to valve (4).

  6. Check the fluid level in the steering and brake system tank. Refer to Operation and Maintenance Manual, SEBU7064, "Hoist, Steering, and Brake System Oil Level - Check" for the correct procedure.

Caterpillar Information System:

D350E Series II Articulated Truck Steering Check and Combiner Valve - Remove
216, 226 and 228 Skid Steer Loaders Engine Supplement Water Pump - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F333 Fuel Hold-In Solenoid - Low Current
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F332 Air Inlet Heater Relay - Low Current
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F331 Transmission Solenoid Creeper - Low Current
797 Off-Highway Truck Power Train Gear Pump (Torque Converter Charging and Transmission Lubrication)
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Accessory Drive (Front) - Remove
CB-634C Vibratory Compactor Specifications
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines Crank Terminate Speed Calibration
3116 Engine for Challenger 35, and Challenger 45 Agricultural Tractors and 3126 Engine for Challenger 55 Agricultural Tractor Engine Supplement Engine - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F330 Transmission Solenoid REV - Low Current
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F329 Transmission Solenoid MC2 - Low Current
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F334 PTO Solenoid - Low Current
AP-1055B and BG-2455C Asphalt Pavers Speedometer and Machine Hour Meter
Flexxaire Fan Caterpillar Reference Material (Flexxaire Fan)
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Power Train Transmission Hydraulic Control Operation
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F335 Steering Reverse Solenoid - Low Current
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Steering Pump - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F336 Fuel Pull-In Relay - Low Current
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Accessory Drive (Front) - Install
773D and 775D Quarry Trucks and 773E and 775E Off-Highway Trucks Power Train Transfer Gears - Assemble
D400E Series II Articulated Truck Accumulator (Suspension) - Remove and Install
554 Forwarder and 574 Forwarder Cab Tilt Hydraulic System Oil Level - Check
3524B Engine for Caterpillar Built Machines Accessory Drive (Rear) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.