773D Off-Highway Truck and 775D Quarry Truck Caterpillar


Hoist and Brake Tank Oil Level - Check

Usage:

773D 7CS


Illustration 1g00527653

Check the oil in the hoist and brake tank. Check the oil level with the dump body in the lowered position. Make sure that the engine is stopped.



Illustration 2g00519274

  1. Check the oil level in the upper sight gauge. If the oil is cold, the oil level must be to the "FULL COLD" mark on the sight gauge.

    If the oil is at the operating temperature, the oil must be to the "FULL WARM" mark on the sight gauge.

  2. If the oil level must be checked with raised hoist cylinders, use the lower sight gauge.

  3. If necessary, add oil. If the system has been drained, see this Operation and Maintenance Manual, "Hoist and Brake Tank Oil - Change" for the proper procedure.

Caterpillar Information System:

980G Wheel Loader Power Train Differential and Bevel Gear - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System General Information
554 Forwarder and 574 Forwarder Oil Filter (Transmission Gearbox Pump) - Replace
980G Wheel Loader Machine Systems Pilot Valve (Steering) - Disassemble
773D Off-Highway Truck and 775D Quarry Truck Hydraulic System Hydraulic System
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System Hydraulic System
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0668 FMI 03 Transmission Control (Shift Lever) Voltage Above Normal - Test
793C and 793C XQ Off-Highway Truck Air System and Brakes Relief Valve (Brake Oil Cooler) - Test and Adjust
D250E Series II and D300E Series II Articulated Trucks Machine Systems Oscillating Hitch - Remove
554 Forwarder and 574 Forwarder Hydraulic System Oil - Change
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0668 FMI 02 Transmission Control (Shift Lever) Incorrect Signal - Test
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Caterpillar Monitoring System
773D Off-Highway Truck and 775D Quarry Truck Suspension Cylinder - Check
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Optimizing Turning Performance
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Engine Starting
D250E Series II and D300E Series II Articulated Trucks Machine Systems Oscillating Hitch - Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0672 FMI 02 Speed Sensor (Torque Converter Output) Incorrect Signal - Test
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System Gear Pump (Hoist and Brake)
980G Wheel Loader Machine Systems Pilot Valve (Steering) - Assemble
554 Forwarder and 574 Forwarder Oil Filter (Implement Case Drain) - Replace
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Implement Electronic Control System
561M Pipelayer Before Operation
216 and 226 Skid Steer Loaders Machine Systems Bank Valve
216 and 226 Skid Steer Loaders Machine Systems Diverter Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.