D250E Series II and D300E Series II Articulated Trucks Machine Systems Caterpillar


Oscillating Hitch - Remove

Usage:

D250E II 4PS

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
A  5P-9694  Ratchet Hoist 
B  1U-8233  Nylon Lifting Sling 

Start By:

  1. Remove the hitch drive shaft bearings. See Disassembly and Assembly, "Hitch Drive Shaft Bearings - Remove and Install".


    Illustration 1g00529129

  1. Use Tooling (A) in order to keep oscillating hitch (1) in an upright position.


    Illustration 2g00529077

  2. Use Tooling (B) in order to attach a suitable hoist to oscillating hitch (1). Oscillating hitch (1) has a weight of 360 kg (795 lb).


    Illustration 3g00529193

  3. Use Tooling (A), Tooling (B) and a block in order to level oscillating hitch (1) on the hoist. Slowly remove oscillating hitch (1) from rear frame (2).


    Illustration 4g00529198

  4. Remove seal (3) from rear frame (2).

Caterpillar Information System:

554 Forwarder and 574 Forwarder Hydraulic System Oil - Change
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0668 FMI 02 Transmission Control (Shift Lever) Incorrect Signal - Test
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Caterpillar Monitoring System
769D Off-Highway Truck and 771D Quarry Truck Engine Water Pump - Inspect
769D Off-Highway Truck and 771D Quarry Truck Cooling System Water Temperature Regulator - Replace
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Adjusting Implement Kick-out Pressure
784C and 785C Off-Highway Trucks Machine Systems Service and Parking Brake (Front) - Assemble
793C and 793C XQ Off-Highway Truck Air System and Brakes Parking Brake System Pressure - Test and Adjust
561M Pipelayer Final Drive Oil Sample - Obtain
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Service Brake Control
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Creeper Control - If Equipped
561M Pipelayer Transmission Oil Sample - Obtain
793C and 793C XQ Off-Highway Truck Air System and Brakes Relief Valve (Brake Oil Cooler) - Test and Adjust
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0668 FMI 03 Transmission Control (Shift Lever) Voltage Above Normal - Test
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System Hydraulic System
773D Off-Highway Truck and 775D Quarry Truck Hydraulic System Hydraulic System
980G Wheel Loader Machine Systems Pilot Valve (Steering) - Disassemble
554 Forwarder and 574 Forwarder Oil Filter (Transmission Gearbox Pump) - Replace
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System General Information
980G Wheel Loader Power Train Differential and Bevel Gear - Install
773D Off-Highway Truck and 775D Quarry Truck Hoist and Brake Tank Oil Level - Check
773D Off-Highway Truck and 775D Quarry Truck Suspension Cylinder - Check
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Optimizing Turning Performance
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Engine Starting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.