Oil Filter (Implement Case Drain) - Replace
Reference: Refer to Operation and Maintenance Manual, "Bottom Guard Lowering" for the correct procedure.
- Use a strap type wrench to remove the oil filter. Dispose of the used oil filter properly.
Show/hide table
Illustration 1 | g00874177 |
Show/hide table
Illustration 2 | g00874179 |
554 Forwarder |
Show/hide table
Illustration 3 | g00874157 |
574 Forwarder |
- Remove all of the used gasket from the filter mounting base.
- Apply clean hydraulic oil to the gasket of the new oil filter.
Show/hide table
Illustration 4 | g00101318 |
- Install the new filter by hand. When the gasket contacts the filter mounting base, tighten the filter by an additional 3/4 turn.
- Operate the machine for a few minutes. Check for leaks. Check the oil level of the hydraulic tank.
Reference: Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for the correct procedure.
- Raise the bottom guard and close the engine hood.
Caterpillar Information System:
980G Wheel Loader Machine Systems Pilot Valve (Steering) - Assemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System Gear Pump (Hoist and Brake)
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0672 FMI 02 Speed Sensor (Torque Converter Output) Incorrect Signal - Test
D250E Series II and D300E Series II Articulated Trucks Machine Systems Oscillating Hitch - Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Engine Starting
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Optimizing Turning Performance
773D Off-Highway Truck and 775D Quarry Truck Suspension Cylinder - Check
773D Off-Highway Truck and 775D Quarry Truck Hoist and Brake Tank Oil Level - Check
980G Wheel Loader Power Train Differential and Bevel Gear - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System General Information
554 Forwarder and 574 Forwarder Oil Filter (Transmission Gearbox Pump) - Replace
980G Wheel Loader Machine Systems Pilot Valve (Steering) - Disassemble
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Implement Electronic Control System
561M Pipelayer Before Operation
216 and 226 Skid Steer Loaders Machine Systems Bank Valve
216 and 226 Skid Steer Loaders Machine Systems Diverter Valve
216 and 226 Skid Steer Loaders Machine Systems General Information
216 and 226 Skid Steer Loaders Machine Systems Interlock Manifold Valve
216 and 226 Skid Steer Loaders Machine Systems Pilot Hydraulic System
554 Forwarder and 574 Forwarder Hydraulic System Oil Level - Check
784C and 785C Off-Highway Trucks Machine Systems Brake Valve (Parking and Secondary) - Disassemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System Electronic Control (Body Down or Up Switch)
793C Off-Highway Truck/Tractor Power Train Transmission, Rear Axle Housing, and Wheel Group - Install
784C and 785C Off-Highway Trucks Machine Systems Brake Valve (Parking and Secondary) - Assemble