Fuel Tank - Install
Swing Boom
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
Show/hide table
Illustration 1 | g00618598 |
- The empty weight of the fuel tank is 89 kg (196 lb). Fasten Tooling (A) to fuel tank (9). Attach lifting straps and a suitable lifting device to Tooling (A). Put the fuel tank in position for installing fuel return line (10) .
- Connect fuel return line (10) to the fuel tank.
Show/hide table
Illustration 2 | g00618599 |
- Place the fuel tank in position for installation. Install four bolts (5) that hold the fuel tank in place.
Show/hide table
Illustration 3 | g00618776 |
- Use bolt (8) to install the clip.
- Connect fuel line (6) to fuel supply valve (7). Turn the fuel supply valve to the ON position.
- Attach Tooling (A) to cover (4). Attach a lifting strap and a suitable lifting device to the tooling. Place the cover in position for installation and install the five bolts and washers in the cover.
Show/hide table
Illustration 4 | g00618582 |
- Connect wire connector (3) .
Show/hide table
Illustration 5 | g00618585 |
- Connect two wires to the backup alarm.
Show/hide table
Illustration 6 | g00618579 |
- Install the bolts and cover (1) on the rear of the machine.
Show/hide table
Illustration 7 | g00618773 |
End By: Install the saddle assembly (swing boom).
Caterpillar Information System:
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Fuel Tank Cap - Clean
527 Track-Type Skidder Machine Supplements Fuel Tank - Install
527 Track-Type Skidder Machine Supplements Fuel Tank - Remove
527 Track-Type Skidder Machine Supplements Fuel Tank - Remove
CB-534C and CB-634C Vibratory Compactors Steering System Metering Pump (Steering)
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Vane Pump (Implement)
784C and 785C Off-Highway Trucks Machine Systems Air Conditioner - Remove
527 Track-Type Skidder Engine Supplement Water Temperature Regulator - Remove and Install
527 Track-Type Skidder Engine Supplement Transmission Oil Cooler - Remove and Install
527 Track-Type Skidder Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
793C Off-Highway Truck/Tractor Power Train Gear Pump (Torque Converter and Transmission) - Install
988F and 988F Series II Wheel Loaders Power Train Transmission Hydraulic Control Valve - Disassemble
3176C and 3196 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Primary Steering Backup)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Secondary Steering Backup)
773D Off-Highway Truck and 775D Quarry Truck Power Train Torque Converter
3176C and 3196 Engines For Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Battery or Battery Cable - Inspect/Replace
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Install
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Remove
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Transfer Gears
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Oil Filter (Steering)
793C and 793C XQ Off-Highway Trucks Hydraulic System Brake Oil Overheating Troubleshooting