527 Track-Type Skidder Machine Supplements Caterpillar

Fuel Tank - Remove

Usage:

527 2RS

Swing Boom

Start By:

Remove the saddle assembly (swing boom).

Show/hide table

Table 1
Required Tools
Tool	Part Number	Description	Qty
A	138-7575	Link Bracket	2

Show/hide table

NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates.

Note: Put identification on all lines, hoses, wires, and tubes for installation purposes. Install a cap or plug on all lines, hoses, and tubes that are disconnected. The caps and/or plugs prevent the loss of fluid and contaminants cannot enter the system.

Show/hide table




Illustration 1	g00618773

Remove the bolts and cover (1) from the rear of the machine.

Show/hide table




Illustration 2	g00618579

Disconnect two wires (2) from the backup alarm.

Show/hide table




Illustration 3	g00618585

Disconnect wire connector (3) .

Show/hide table




Illustration 4	g00618582

Attach Tooling (A) to cover (4). Attach a lifting strap and a suitable lifting device to the tooling. Remove five bolts and cover (4) .

Show/hide table




Illustration 5	g00618776

Turn fuel supply valve (7) to the CLOSED position. Disconnect fuel line (6) from valve (7) .

Remove bolt (8) and the clip.

Remove four bolts (5) that hold the fuel tank in position.

Show/hide table




Illustration 6	g00618598

The empty weight of the fuel tank is 89 kg (196 lb). Fasten Tooling (A) to fuel tank (9). Attach lifting straps and a suitable lifting device to Tooling (A). Move fuel tank (9) away from the cab no more than 51 mm (2 inch).