Fixed Boom
Show/hide table
Table 1
Required Tools     |
Tool     |
Part Number     |
Description     |
Qty     |
A     |
138-7575     |
Link Bracket     |
2     |
Show/hide table
|
NOTICE |
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
|
Note: Put identification on all lines, hoses, wires, and tubes for installation purposes. Install a cap or plug on all lines, hoses, and tubes that are disconnected. The caps and/or plugs prevent the loss of fluid and contaminants cannot enter the system.
Show/hide table
|
|
|
Illustration 1 | g00618576 |
- Remove the bolts and covers (1) from the rear of the machine.
Show/hide table
|
|
|
Illustration 2 | g00618579 |
- Disconnect two wires (2) from the backup alarm.
Show/hide table
|
|
|
Illustration 3 | g00618585 |
- Disconnect wire connector (3) .
Show/hide table
|
|
|
Illustration 4 | g00618582 |
- Attach Tooling (A) to cover (4). Attach a lifting strap and a suitable lifting device to Tooling (A). Remove the five bolts, the washers, and cover (4) .
Show/hide table
|
|
|
Illustration 5 | g00618592 |
Note: The cylinders have been removed for photographic clarity.
- Turn fuel supply valve (7) to the CLOSED position. Disconnect fuel line (6) from valve (7) .
- Remove bolt (8) and the clip.
- Remove four bolts (5) that hold the fuel tank in position.
Show/hide table
|
|
|
Illustration 6 | g00618598 |
- Fasten Tooling (A) to fuel tank (9). Attach lifting straps and a suitable lifting device to Tooling (A). Move the fuel tank away from the cab no more than 51 mm (2 inch).
Show/hide table
|
|
|
Illustration 7 | g00618599 |
- Move the fuel tank away from the cab so that fuel return line (10) can be disconnected from the fuel tank. The weight of the empty fuel tank is 89 kg (196 lb). Remove the fuel tank.