Fuel Tank - Install
Fixed Boom
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
- Fasten Tooling (A) to fuel tank (9). Fasten lifting straps to Tooling (A). Use a suitable lifting device to put the fuel tank in position for the connection of the fuel return line. The empty weight of the fuel tank is 89 kg (196 lb).
Show/hide table
Illustration 1 | g00618738 |
- Connect fuel return line (10) to the fuel tank.
Show/hide table
Illustration 2 | g00618599 |
- Move the fuel tank into position for installation.
Show/hide table
Illustration 3 | g00618592 |
Note: The cylinders were removed for photographic clarity.
- Install four bolts (5) that hold the fuel tank in place.
- Install the clip and bolt (8) .
- Connect fuel line (6) to fuel supply valve (7). Turn the valve to the ON position.
- Attach Tooling (A) to cover (4). Attach a lifting strap and a suitable lifting device to the tooling. Place the cover in position for installation and install the five bolts and washers in the cover.
Show/hide table
Illustration 4 | g00618582 |
- Connect wire connector (3) .
Show/hide table
Illustration 5 | g00618585 |
- Connect two wires to the backup alarm.
Show/hide table
Illustration 6 | g00618579 |
- Install covers (1) to the rear of the machine.
Show/hide table
Illustration 7 | g00618576 |
Caterpillar Information System:
527 Track-Type Skidder Machine Supplements Fuel Tank - Remove
527 Track-Type Skidder Machine Supplements Fuel Tank - Remove
CB-534C and CB-634C Vibratory Compactors Steering System Metering Pump (Steering)
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Vane Pump (Implement)
784C and 785C Off-Highway Trucks Machine Systems Air Conditioner - Remove
527 Track-Type Skidder Engine Supplement Water Temperature Regulator - Remove and Install
527 Track-Type Skidder Engine Supplement Transmission Oil Cooler - Remove and Install
527 Track-Type Skidder Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
793C Off-Highway Truck/Tractor Power Train Gear Pump (Torque Converter and Transmission) - Install
988F and 988F Series II Wheel Loaders Power Train Transmission Hydraulic Control Valve - Disassemble
784C and 785C Off-Highway Trucks Machine Systems Hoist Electronic Control - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Torque Converter
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Fuel Tank Cap - Clean
527 Track-Type Skidder Machine Supplements Fuel Tank - Install
3176C and 3196 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Primary Steering Backup)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Secondary Steering Backup)
773D Off-Highway Truck and 775D Quarry Truck Power Train Torque Converter
3176C and 3196 Engines For Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Battery or Battery Cable - Inspect/Replace
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Install
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Remove
527 Track-Type Skidder Machine Supplements Hydraulic Tank - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Transfer Gears