Final Drive
Show/hide table
Illustration 1 | g00774016 |
(1) Apply 9S-3263 Thread Lock Compound on the threads of the bolts before installation.
(2) Torque for 23 bolts ... 430 ± 60 N·m (317 ± 44 lb ft)
(3) 7D-7603 Washer
- Thickness of a new washer ... 30.96 ± 0.08 mm (1.219 ± 0.003 inch)
(4) 8X-5689 Shaft
- Outside diameter of a new shaft ... 77.577 ± 0.010 mm (3.0542 ± 0.0004 inch)
Note: Measure the diameter at the contact point of the roller bearings.
(5) 9M-4422 Planetary Gear
- Inside diameter of a new gear ... 112.441 ± 0.010 mm (4.4268 ± 0.0004 inch)
Note: Measure the diameter at the contact point of the roller bearings.
(6) Lubricate the seal with 1P-0808 Multipurpose Grease.
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove
527 Track-Type Skidder Alternator and Fan Belts - Inspect/Adjust/Replace
3406C Engines for Caterpillar Built Machines Cylinder Block Cover Group - If Equipped
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Piston Motor (Hydrostatic)
527 Track-Type Skidder Power Train Platform
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Motor Mounting (Hydrostatic)
D250E Series II and D300E Series II Articulated Trucks Machine Systems Steering Cylinder - Install
784C and 785C Off-Highway Trucks Machine Systems Control Valve (Hoist) - Remove
3176C and 3196 Engines For Caterpillar Built Machines Electronic Unit Injector - Install
988F and 988F Series II Wheel Loaders Power Train Transmission Hydraulic Control Valve - Assemble
793C Off-Highway Truck/Tractor Power Train Differential and Bevel Gear - Remove
3304B and 3306B Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Turbocharger - Install
3304B and 3306B Engines for Caterpillar Built Machines Housing (Front) - Remove
773E Off-Highway Truck Power Train Final Drive
3176C and 3196 Engines For Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
D250E Series II and D300E Series II Articulated Trucks Power Train Universal Joint (Rear) - Remove and Install
554 Forwarder and 574 Forwarder Window Wiper and Washer Control
793C Off-Highway Truck/Tractor Power Train Differential and Bevel Gear - Install
527 Track-Type Skidder Battery - Inspect
3406C Engines for Caterpillar Built Machines Crankshaft Pulley
784C and 785C Off-Highway Trucks Machine Systems Control Valve (Hoist) - Install
3304B and 3306B Engines for Caterpillar Built Machines Housing (Front) - Install