554 Forwarder and 574 Forwarder Caterpillar


Window Wiper and Washer Control

Usage:

554 1AM



Illustration 1g00658415

These two switches are located on the left side of the front dash.

Front Window Wiper (1) - Press the switch to the middle position in order to turn the wipers to low speed. Press the top of the switch in order to activate high speed. Press the bottom of the switch in order to turn off the window wiper.

Front Window Washer (2) - Press this switch in order to activate a momentary spray of window washer solvent onto the front window.




Illustration 2g00871155

This switch is located on the hand control on the right side of the seat.

Window Wiper (Single Pass) (3) - This is a momentary switch. Pressing this switch will wipe the window (front or rear) once. The window wiper that is activated depends on the direction of the seat. When the seat faces toward the front of the machine, the front wiper will operate when the switch is pressed. When the seat faces toward the rear of the machine, the rear wiper will operate when the switch is pressed.




Illustration 3g00871156

These switches are located on the right rear switch panel.

Rear Window Wiper and Window Washer (4) - Press the switch in order to turn on the windshield wiper. Continue to hold the top of the switch in order to activate the windshield washer. Spring force will return the switch when the switch is released. Press the bottom of the switch in order to turn off the window wiper.

Side Window Wiper (5) - Press this switch in order to activate the side window wiper (if equipped).

Caterpillar Information System:

D250E Series II and D300E Series II Articulated Trucks Power Train Universal Joint (Rear) - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
773E Off-Highway Truck Power Train Final Drive
3304B and 3306B Engines for Caterpillar Built Machines Housing (Front) - Remove
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Turbocharger - Install
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Final Drive
3176C and 3196 Engines For Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove
527 Track-Type Skidder Alternator and Fan Belts - Inspect/Adjust/Replace
3406C Engines for Caterpillar Built Machines Cylinder Block Cover Group - If Equipped
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Piston Motor (Hydrostatic)
527 Track-Type Skidder Power Train Platform
793C Off-Highway Truck/Tractor Power Train Differential and Bevel Gear - Install
527 Track-Type Skidder Battery - Inspect
3406C Engines for Caterpillar Built Machines Crankshaft Pulley
784C and 785C Off-Highway Trucks Machine Systems Control Valve (Hoist) - Install
3304B and 3306B Engines for Caterpillar Built Machines Housing (Front) - Install
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Spray Nozzle
3406E On-Highway Engine Compression Brake - Remove - If Equipped
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Speed Sensor (Torque Converter Output)
527 Track-Type Skidder Bulldozer Linkage - Lubricate
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic)
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Assemble
527 Track-Type Skidder Cooling System Coolant (DEAC) - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.