Spray Nozzle
Show/hide table
 | |
| Illustration 1 | g00512159 |
(1) Spray bars and nozzles
(2) Assembly for the spray nozzle
(3) 140-3140 Clamp
Note: Install the supplied O-ring and the hardware.
(4) 140-3138 Strainer
(5) 081-2965 Seal
(6) 140-3137 Nozzle
(7) 140-3139 Cap
Four nozzles are located on each bar.
CB-434C ... 6
CB-534C ... 7
CB-634C ... 9
Note: The spray nozzles are made of plastic and brass. These materials help prevent corrosion.
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Housing (Front) - Install
784C and 785C Off-Highway Trucks Machine Systems Control Valve (Hoist) - Install
3406C Engines for Caterpillar Built Machines Crankshaft Pulley
527 Track-Type Skidder Battery - Inspect
793C Off-Highway Truck/Tractor Power Train Differential and Bevel Gear - Install
554 Forwarder and 574 Forwarder Window Wiper and Washer Control
D250E Series II and D300E Series II Articulated Trucks Power Train Universal Joint (Rear) - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
773E Off-Highway Truck Power Train Final Drive
3304B and 3306B Engines for Caterpillar Built Machines Housing (Front) - Remove
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Turbocharger - Install
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
3406E On-Highway Engine Compression Brake - Remove - If Equipped
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Speed Sensor (Torque Converter Output)
527 Track-Type Skidder Bulldozer Linkage - Lubricate
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic)
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Assemble
527 Track-Type Skidder Cooling System Coolant (DEAC) - Change
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Pump - Remove
824G , 825G and 826G Landfill Compactor Product Identification Number, Serial Number and EU's CE Plate Locations
3406E On-Highway Engine Compression Brake - Install - If Equipped
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Pump - Install
527 Track-Type Skidder Cooling System Extended Life Coolant Extender - Add
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Pump - Disassemble