527 Track-Type Skidder Caterpillar

Power Angle Tilt Blade

Illustration 1	g00338652

Tilt Left (1) - Pull the lever to the left in order to change the dozer blade tilt to the left. The lever will return to the HOLD position when you release the lever.

Tilt Hold (2) - The lever will return to the HOLD position when you release the lever. The blade movement stops.

Tilt Right (3) - Push the lever to the right in order to change the dozer blade tilt to the right. The lever will return to the HOLD position when you release the lever.

Illustration 2	g00338653

Angle Left (4) - Rotate the lever to the left in order to change the dozer blade angle to the left.

Angle Right (5) - Rotate the lever to the right in order to change the dozer blade angle to the right.

Power Angle Blade (If Equipped)

Illustration 3	g00338652

Angle Left (1) - Rotate the lever to the left in order to change the dozer blade angle to the left.

Angle Hold (2) - The lever returns to HOLD when you release the lever. Blade movement stops.

Angle Right (3) - Rotate the lever to the right in order to change the dozer blade angle to the right.

Mechanical Angle Blade (If Equipped)

Illustration 4	g00535167
Bulldozer lift control

Float (1) - Push the lever all the way forward into the detent for the FLOAT position. The blade will move up and down. This movement allows the blade to follow the contour of the ground.

The lever will remain in FLOAT until the lever is pulled out of the detent. The lever will return to the HOLD position when the lever is released.

Lower (2) - Push the lever forward in order to lower the blade. The lever will return to the HOLD position when the lever is released.

Hold (3) - The lever will return to the HOLD position when you release the lever from either the RAISE position or the LOWER position.

Raise (4) - Pull the lever backward in order to raise the blade. Release the lever in order to stop lifting the blade. The lever will return to the HOLD position when the lever is released.