Screed Travel Lock
Show/hide table
In order to prevent personal injury from accidental screed movement, lock the screed in the RAISED position by using the travel lock lever in order to extend the lock pins, after the screed is fully raised. |
Show/hide table
Illustration 1 | g00510790 |
Screed travel lock lever |
Show/hide table
Illustration 2 | g00510315 |
Screed travel lock pins |
There are two levers on the machine. The levers are located behind the operator station on either side of the machine. The lock pins are used in order to hold the screed in a RAISED position for travel.
- Raise the screed to a position that is high enough to extend the lock pins.
- Move the lever in order to extend the lock pins to the fullest extension.
- Lower the screed onto the lock pins.
Caterpillar Information System:
527 Track-Type Skidder Bulldozer Blade Tilt and Angle Control
527 Track-Type Skidder Power Train Steering Clutches and Brakes
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Indicators
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Pump Upstroke/Deadband Test
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Planetary - Disassemble
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Differential and Bevel Gear
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Hydraulic Filter (Parking Brake Release)
3406E On-Highway Engine Camshaft - Install
527 Track-Type Skidder Power Train Steering Clutch and Brake and Foot Brake Controls Linkage
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Gear Pump (Pulled Unit Hydraulics and Rear Brake Cooling)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic System
527 Track-Type Skidder Windows - If Equipped
D250E Series II and D300E Series II Articulated Trucks Power Train Hitch Drive Shaft Bearings - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Power Train Universal Joint (Hitch) - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Screen (Torque Converter and Front Brake Cooling)
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering and Brake Manifold Valve - Remove
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Brake Cooling System
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Brake Cooling System
3306C Engines for Caterpillar Built Machines Water Pump
527 Track-Type Skidder Power Train Final Drive
527 Track-Type Skidder Grapple Rotation Control
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Hoist, Torque Converter, and Brake System Troubleshooting
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Planetary - Assemble