Inverter Valve (Secondary Brake) - Install
Installation Procedure
- Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.
- Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
- Position inverter valve (1) onto the plate assembly.
Show/hide table
 | |
| Illustration 1 | g00505024 |
- Install two bolts (5) and the hard washers to inverter valve (1) .
- Connect three hose assemblies (4), (3) and (2) to inverter valve (1) .
End By: Close the drain valves. Refer to Disassembly and Assembly, "Air Tanks (Brake) - Purge".
Caterpillar Information System:
583R Pipelayer Power Train Final Drive - Assemble
824G , 825G and 826G Landfill Compactor Power Guard Control
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Position Sensor (Dump Body) - Adjust
824G , 825G and 826G Landfill Compactor Reversing Fan Control
572R Pipelayer Power Train Bevel and Transfer Gears - Assemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0041 FMI 03 Sensor Power Supply (8 DCV) Voltage Above Normal - Test
773D Off-Highway Truck and 775D Quarry Truck Engine Starting with Ether Starting Aid - If Equipped
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Inverter Valve (Secondary Brake) - Remove
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Hoist Cylinder
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
583R Pipelayer Power Train Final Drive - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner - Remove
3176C and 3196 Engines for Caterpillar Built Machines Fuel Transfer Pump
3408E and 3412E Engines for Caterpillar Built Machines Valve Rocker Arms, Lifters, and Bridges
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement Hydraulic Operational Checks
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Retaining Ring and Pin (Body) - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Cylinder Head - Remove
3406C Engines for Caterpillar Built Machines Front Housing and Covers
583R Pipelayer Engine Supplement Engine Side Guards - Remove and Install
836G Landfill Compactor and 834G Wheel Dozer Specifications
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Inverter Valve (Secondary Brake) - Assemble
836G Landfill Compactor and 834G Wheel Dozer Radiator Grill - Clean
836G Landfill Compactor and 834G Wheel Dozer Plate Locations and Film Locations
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Piston Pump (Steering) - Remove