Winch Control Metering Pump - Disassemble
Disassembly Procedure
Start By:
- Remove the winch control metering pump. Refer to Disassembly and Assembly, "Winch Control Metering Pump - Remove".
- Remove three O-ring seals (1) .
Show/hide table
Illustration 1 | g00498813 |
- Remove nut (2) and gear (3). Remove the key from the shaft, if necessary.
Show/hide table
Illustration 2 | g00498815 |
- Remove three bolts (4) .
Show/hide table
Illustration 3 | g00498817 |
- Remove bearing carrier (5) and O-ring seal (6) .
Show/hide table
Illustration 4 | g00498819 |
- Remove spring pin (8) and shaft (7) .
Show/hide table
Illustration 5 | g00498820 |
- Remove eight bolts (9) .
Show/hide table
Illustration 6 | g00498821 |
Note: Put identification marks on the pump parts for assembly purposes.
- Remove cover plate assembly (10) from pump body (11) .
Note: The seals will be damaged when diaphragm (12) is removed.
Show/hide table
Illustration 7 | g00498822 |
- Remove diaphragm (12), the gaskets and the seal from plate assembly (10) .
- Lift drive gear (13) and driven gear (14) out of pump body (11) .
Show/hide table
Illustration 8 | g00498823 |
- Remove pump body (11) from mounting adapter (15) .
Show/hide table
Illustration 9 | g00498824 |
Caterpillar Information System:
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Relief Valve (Pulled Unit Dual Stage)
583R Pipelayer Machine Systems Winch Control Metering Pump - Install
583R Pipelayer Machine Systems Winch Control Metering Pump - Remove
784C and 785C Off-Highway Truck/Tractors Power Train Rear Axle and Final Drive System
784C and 785C Off-Highway Truck/Tractors Power Train Transmission Hydraulic System
784C and 785C Off-Highway Truck/Tractors Power Train System Information (Power Train)
784C and 785C Off-Highway Trucks Machine Systems Slack Adjuster (Rear) - Remove
3406E On-Highway Engine Water Pump - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train System Pressure - Release
3406E On-Highway Engine Water Pump - Disassemble
3406E On-Highway Engine Water Pump - Install
769D Off-Highway Truck and 771D Quarry Truck Lifting and Tying Down the Machine - 769D Off-Highway Truck
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Proportioning Solenoid (Pulled Unit)
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Proportioning Solenoid (Hoist)
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Priority Valve - Disassemble
583R Pipelayer Machine Systems Winch Control Metering Pump - Assemble
980G Wheel Loader Power Train Transmission Oil Pump - Disassemble
836G Landfill Compactor and 834G Wheel Dozer Backup Alarm
416C, 426C, 428C, 436C and 438C Backhoe Loaders Fire Extinguisher Location
836G Landfill Compactor and 834G Wheel Dozer Alternate Exit
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Front Guard - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Front Guard - Install
583R Pipelayer Power Train Track Adjuster - Remove
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Oil Filter (Pulled Unit Brake Cooling)