Transmission Oil Pump - Disassemble
拆卸步骤
开始:
- 拆卸变速箱油泵。 请参考拆解和组装, "变速箱油泵 - 拆卸"。
注: 拆解之前,请彻底清洁变速箱油泵的外部。
- 从变速箱油泵上拆下螺栓 (1) 和有头螺栓 (2) 。
Show/hide table
图 1 | g00498899 |
- 从变速箱油泵上拆下有头螺栓 (3) 。
Show/hide table
图 2 | g00498920 |
- 将歧管组件 (4) 与泵体 (5) 分离。
Show/hide table
图 3 | g01083561 |
- 从歧管组件 (4) 上拆下 O 形密封圈 (6) 和轴承 (7) 。
Show/hide table
图 4 | g01083563 |
- 从泵体和盖组件上拆下驱动齿轮和惰轮组件 (8) 。
Show/hide table
图 5 | g00498923 |
注: 为了便于安装,在驱动齿轮和惰轮组件 (8) 上做上识别标记。
- 将盖组件 (9) 与泵体 (5) 分离。
Show/hide table
图 6 | g00498924 |
- 从盖组件 (9) 上拆下 O 形密封圈 (10) 。
Show/hide table
图 7 | g01083564 |
- 从盖组件 (9) 上拆下轴承 (11) 。
- 从盖组件 (9) 上拆下 O 形密封圈 (12) 。
Show/hide table
图 8 | g00498926 |
- 从盖组件 (9) 上拆下唇形密封圈 (13) 。
Show/hide table
图 9 | g00498927 |
Caterpillar Information System:
583R Pipelayer Machine Systems Winch Control Metering Pump - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Priority Valve - Disassemble
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Proportioning Solenoid (Hoist)
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Proportioning Solenoid (Pulled Unit)
583R Pipelayer Machine Systems Winch Control Metering Pump - Disassemble
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Relief Valve (Pulled Unit Dual Stage)
583R Pipelayer Machine Systems Winch Control Metering Pump - Install
583R Pipelayer Machine Systems Winch Control Metering Pump - Remove
784C and 785C Off-Highway Truck/Tractors Power Train Rear Axle and Final Drive System
784C and 785C Off-Highway Truck/Tractors Power Train Transmission Hydraulic System
784C and 785C Off-Highway Truck/Tractors Power Train System Information (Power Train)
784C and 785C Off-Highway Trucks Machine Systems Slack Adjuster (Rear) - Remove
836G Landfill Compactor and 834G Wheel Dozer Backup Alarm
416C, 426C, 428C, 436C and 438C Backhoe Loaders Fire Extinguisher Location
836G Landfill Compactor and 834G Wheel Dozer Alternate Exit
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Front Guard - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Front Guard - Install
583R Pipelayer Power Train Track Adjuster - Remove
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Oil Filter (Pulled Unit Brake Cooling)
980G Wheel Loader Power Train Transmission Oil Pump - Assemble
583R Pipelayer Machine Systems Winch - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Filling and Flushing the Hydrostatic System - Test
583R Pipelayer Power Train Track Adjuster - Install
583R Pipelayer Power Train Track Adjuster - Disassemble