Winch Control Metering Pump - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Description     | Qty     |
A     | 8S-7632     | Stand     | 1     |
8S-7641 | Tube     | 1     | |
8S-8048 | Saddle     | 1     | |
8S-7615 | Pin     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Place winch control metering pump (2) in position.
Show/hide table
Illustration 1 | g00546067 |
- Install bolts (1) and the washers in order to hold winch control metering pump (2) to the winch brake housing.
- Raise the boom and remove tool (A ) from the bottom boom frame bracing.
Show/hide table
Illustration 2 | g00498807 |
Caterpillar Information System:
583R Pipelayer Machine Systems Winch Control Metering Pump - Remove
784C and 785C Off-Highway Truck/Tractors Power Train Rear Axle and Final Drive System
784C and 785C Off-Highway Truck/Tractors Power Train Transmission Hydraulic System
784C and 785C Off-Highway Truck/Tractors Power Train System Information (Power Train)
784C and 785C Off-Highway Trucks Machine Systems Slack Adjuster (Rear) - Remove
3406E On-Highway Engine Water Pump - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train System Pressure - Release
3406E On-Highway Engine Water Pump - Disassemble
3406E On-Highway Engine Water Pump - Install
769D Off-Highway Truck and 771D Quarry Truck Lifting and Tying Down the Machine - 769D Off-Highway Truck
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Rear Axle and Final Drive System
773D Off-Highway Truck and 775D Quarry Truck Towing With Inoperable Engine
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Relief Valve (Pulled Unit Dual Stage)
583R Pipelayer Machine Systems Winch Control Metering Pump - Disassemble
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Proportioning Solenoid (Pulled Unit)
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Proportioning Solenoid (Hoist)
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Priority Valve - Disassemble
583R Pipelayer Machine Systems Winch Control Metering Pump - Assemble
980G Wheel Loader Power Train Transmission Oil Pump - Disassemble
836G Landfill Compactor and 834G Wheel Dozer Backup Alarm
416C, 426C, 428C, 436C and 438C Backhoe Loaders Fire Extinguisher Location
836G Landfill Compactor and 834G Wheel Dozer Alternate Exit
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Front Guard - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Front Guard - Install