69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Caterpillar


Speed Sensor (Transmission) - Disassemble

Usage:

769D 5SS

拆解步骤

表 1
所需工具 
工具  零件号  零件说明  数量 
FT-0995  夹钳 
9S-9155  定心隔套 
5F-7345  螺钉 
1P-0070  Bar 

开始:

  1. 卸下变速箱转速传感器。 请参阅拆解和组装, "变速箱转速传感器 - 拆卸"。


    图 1g00490920

  1. 将转速传感器 (2) 从壳体 (1) 上拆下。

  2. 将 O 形密封圈从转速传感器 (2) 上拆下。


    图 2g00490945

  3. 转动传感器转子 (3),使 4 颗螺栓 (4) 和垫圈可以通过传感器转子 (3) 上的孔看到,如图所示。

  4. 拆卸将护圈固定至壳体 (1) 上的四只螺栓 (4) 和垫圈。 从壳体 (1) 上拆下传感器转子 (3) 和护圈。


    图 3g00490960

  5. 拆卸将滚珠轴承 (5) 固定至传感器转子 (3) 的挡圈 (6)。


    图 4g00490965

  6. 使用工具 (A) 从传感器转子 (3) 拆卸滚珠轴承 (5)。

  7. 从传感器转子 (3) 拆卸护圈 (7)。

Caterpillar Information System:

3304B and 3306B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
769D Off-Highway Truck/Tractor and 771D Quarry Truck Plate Locations and Film Locations
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Troubleshooting Diagnostic Codes
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Water Pump - Install
988G Wheel Loader Machine Systems Parking Brake - Assemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Service Tools
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Speed Sensor (Transmission) - Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) General Information
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Water Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Using Caterpillar Monitoring System to Determine Service Codes
769D Off-Highway Truck and 771D Quarry Truck Engine Start Switch
3306C Engines for Caterpillar Built Machines Fuel Transfer Pump
D250E Series II and D300E Series II Articulated Trucks Hydraulic System Oil Filter, Strainer and Breather - Replace/Clean
D250E Series II and D300E Series II Articulated Trucks Hydraulic System Oil Level - Check
D250E Series II and D300E Series II Articulated Trucks Hydraulic Tank Screen - Clean
D250E Series II and D300E Series II Articulated Trucks In-Line Refrigerant Dryer - Check and Replace
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Speed Sensor (Transmission) - Assemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Troubleshooting Electrical System Using Abbreviated Procedures
3306C Engines for Caterpillar Built Machines Fuel Ratio Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Air Conditioner Belt - Inspect/Adjust/Replace
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Air Conditioner Condenser - Clean
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Troubleshooting Diagnostic Codes Using Abbreviated Procedure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.