Main Control Valve (Tilt and Auxiliary) - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
- Install Tooling (A) on main control valve (11). Attach a hoist and a suitable lifting device to Tooling (A) .
Show/hide table
Illustration 1 | g00501491 |
- Use a hoist to install main control valve (11). The weight of main control valve (11) is 75 kg (165 lb).
- Install three bolts (12) .
- Remove the hoist and Tooling (A) from main control valve (11) .
- Install tube assemblies (8) and (10) .
Show/hide table
Illustration 2 | g00501490 |
- Install the tube clip and bolt (9) .
- Connect four hose assemblies (7) .
Show/hide table
Illustration 3 | g00501489 |
- Install tube assemblies (6) and (5) .
- Install tube assemblies (3) and (4) .
Show/hide table
Illustration 4 | g00501488 |
- Connect hose assemblies (2) .
- Install hose assembly (1) .
Show/hide table
Illustration 5 | g00501487 |
End By: Install the front guard. Refer to Disassembly and Assembly, "Front Guard - Install".
Caterpillar Information System:
793C Off-Highway Truck Machine Systems Truck Body and Canopy - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve (Tilt and Auxiliary) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Slack Adjuster (Rear) - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Electric Drive Pump (Secondary Steering) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Hydraulic Caliper Service Brake - Assemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Slack Adjuster (Rear) - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Gear Pump (Implement, Steering and Brakes) - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Slack Adjuster (Rear) - Disassemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Slack Adjuster (Rear) - Assemble
Electronic Modular Control Panel II (EMCP II) For MUI Engines Zero Display of Voltage or Current - Troubleshoot
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0144 FMI 03 Relay (Backup Alarm) Voltage Above Normal - Test
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Pilot Valve
980G Wheel Loader Braking System Parking Brake System Pressure - Test
561M Pipelayer Power Train Hydraulic System
784C and 785C Off-Highway Truck/Tractors Safety Messages
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Main Module
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0144 FMI 06 Relay (Backup Alarm) Current Above Normal - Test
69D and 769D Off-Highway Trucks and 771D Quarry Truck Unit Injector Hydraulic Pump Drive - Install
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
550, 570 and 580 Wheel Harvesters Bogie Drive Chain Tension - Check/Adjust
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0248 FMI 09 CAT Data Link Abnormal Update - Test
3116 Engine for Challenger 35, Challenger 45 Agricultural Tractors and 3126 Engine for Challenger 55 Agricultural Tractor Engine Supplement Aftercooler - Remove and Install
3116 Engine for Challenger 35, Challenger 45 Agricultural Tractors and 3126 Engine for Challenger 55 Agricultural Tractor Engine Supplement Air Cleaner - Remove and Install
Electronic Modular Control Panel II (EMCP II) For MUI Engines Electrical Connector - Inspect