Hydraulic Caliper Service Brake - Assemble
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 5P-3569 | 制动系统活塞压具 | 1 |
| B | 1P-0520 | 起子总成 | 1 |
- 安装之前先核实制动钳的所有部件清洁无异物。
- 检查所有部件是否磨损，必要时更换部件。
Show/hide table
图 1 g00481404 - 将密封 (1) 和环 (2) 安装到液压夹钳行车制动器的孔中。 用清洁的液压油润滑密封 (1) 和环 (2)。
Show/hide table
图 2 g00481405 - 将罩 (3) 安装到液压夹钳行车制动器的孔中。 用清洁的液压油润滑罩 (3)。
Show/hide table
图 3 g00481406 Show/hide table注意 将活塞安装到罩中时要小心操作。 确保罩位于活塞周围的槽种。
- 用清洁的液压油润滑活塞 (4) 的外侧。 用黄铜冲头将活塞 (4) 安装在液压夹钳行车制动器的孔中。
Show/hide table
图 4 g00481407 - 将罩 (5) 安装在制动钳式行车制动器的孔中。 用清洁的液压油润滑罩 (5)。
Show/hide table
图 5 g00481409 Show/hide table注意 将活塞安装到罩中时要小心操作。 确保罩位于活塞周围的槽种。
- 用清洁的液压油润滑活塞 (6) 的外侧。 使用工具 (A) 将活塞 (6) 安装在液压夹钳行车制动器中。
Show/hide table
图 6 g00481411 - 松开工具 (A)，然后插入工具 (B)。 继续在液压夹钳行车制动器中推动活塞 (6)。 对于其余的活塞，重复本步骤。
Show/hide table
图 7 g00481412 Show/hide table
图 8 g00481413 - 将密封 (7) 安装到液压夹钳行车制动器的孔中。 用液压油润滑密封 (7) 和螺塞 (8)。 用软面锤将螺塞 (8) 安装在液压夹钳行车制动器中。
Show/hide table
图 9 g00481414 - 安装盖 (9) 和螺栓 (10)。 拧紧螺栓 (10) 至扭矩为
510 ± 7 N·m (376 ± 5 lb ft) 。Show/hide table
图 10 g00481415 - 将制动衬片组件 (13) 安装在液压夹钳行车制动器中。 将销 (12) 安装在液压夹钳行车制动器中。 此时用手拧紧 (11)。
结束:
- 安装液压夹钳行车制动器。 请参阅拆解和组装, "液压夹钳行车制动器 - 安装"。
Caterpillar Information System:
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Slack Adjuster (Rear) - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Gear Pump (Implement, Steering and Brakes) - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Slack Adjuster (Rear) - Disassemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Slack Adjuster (Rear) - Assemble
Electronic Modular Control Panel II (EMCP II) For MUI Engines Zero Display of Voltage or Current - Troubleshoot
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0144 FMI 03 Relay (Backup Alarm) Voltage Above Normal - Test
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Pilot Valve
Installation of 164-4636 Coolant Recovery Tank {1354} Installation of 164-4636 Coolant Recovery Tank {1354}
D250E Series II and D300E Series II Articulated Trucks Machine Systems Pressure Reducing Valve - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Gear Pump (Implement, Steering and Brakes) - Remove
Repairing the Nonmetallic Fenders, Machine Hoods, and Tank Covers {1273, 7251, 7252} Repairing the Nonmetallic Fenders, Machine Hoods, and Tank Covers {1273, 7251, 7252}
24H Motor Grader Power Train Hydraulic Filter (Differential)
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Electric Drive Pump (Secondary Steering) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Slack Adjuster (Rear) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve (Tilt and Auxiliary) - Remove
793C Off-Highway Truck Machine Systems Truck Body and Canopy - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve (Tilt and Auxiliary) - Install
980G Wheel Loader Braking System Parking Brake System Pressure - Test
561M Pipelayer Power Train Hydraulic System
784C and 785C Off-Highway Truck/Tractors Safety Messages
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Main Module
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0144 FMI 06 Relay (Backup Alarm) Current Above Normal - Test
69D and 769D Off-Highway Trucks and 771D Quarry Truck Unit Injector Hydraulic Pump Drive - Install
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test