928G Wheel Loader Caterpillar

To prevent injury, make sure that no people are working on the machine or near the machine. To prevent injury, keep the machine under control at all times.

Reduce engine speed when you maneuver in tight quarters or when you are going over a hill.

Select the necessary gear speed before you start downgrade. Do not change gears while you are going downhill.

When you go downgrade, use the same gear speed that would be used to go upgrade.

Do not allow the engine to overspeed when you go downhill. Use the service brake pedal to reduce engine overspeed when you are going downhill.

When the load will be pushing the machine, put the transmission selector lever in FIRST speed before you start downhill.

1. Adjust the operator's seat.

2. Fasten the seat belt.

3. Raise all lowered attachments in order to negotiate any obstacles.

Show/hide table



Illustration 1	g00102014

4. Push down on the service brake pedal in order to prevent the machine from moving.

Show/hide table



Illustration 2	g00451069

5. To release the parking brake, push the button on the top of the parking brake lever and lower the parking brake lever.

Show/hide table



Illustration 3	g00466921

Show/hide table



Illustration 4	g00466915

6. Move the transmission direction control lever (1) or transmission direction control switch (2) (if equipped) to the desired direction.

Show/hide table



Illustration 5	g00100970

7. Put the machine in the desired gear speed (3) .

8. Release the service brake pedal.

9. Push down on the accelerator pedal until you achieve the desired engine speed.

10. Drive the machine forward for best visibility and for best control.

Show/hide table

NOTICE
For operator comfort and maximum service life of power train components, deceleration and/or braking is recommended before any directional shifts are made.