Recoil Group
Show/hide table
Illustration 1 | g00101977 |
(1) Torque for the plug in the end of the cylinder ... 320 ± 30 N·m (236 ± 22 lb ft)
(2) Torque for the filler valves that are used for adjusting the track ... 35 ± 7 N·m (26 ± 5 lb ft)
(A) Dimension ... 7 ± 2 mm (0.275 ± 0.079 inch)
Note: Fill the cylinder with SAE 30W oil and evacuate all air. When the cylinder is properly bled off the cylinder should have a maximum piston movement of 3.0 mm (.12) under a load of 44 kN (9892 lb) .
Instructions for Installing the Recoil Spring
- When the recoil spring is installed, tighten retainer (4) until the retainer bottoms out. When retainer (4) bottoms out, the retainer will be 7 ± 2 mm (0.275 ± 0.079 inch) from the frame housing.
- Loosen retainer (4) enough to install retainer lockplates (3) .
Caterpillar Information System:
517 Track-Type Skidder Power Train Front Frame
793C Off-Highway Truck Machine Systems Oil Cooler Core (Front Brake) - Remove
517 Track-Type Skidder Power Train Pivot Shaft
784C and 785C Off-Highway Truck/Tractors Plate Locations and Film Locations
527 Track-Type Skidder Power Train Track Roller Frame
517 Track-Type Skidder Power Train Equalizer Bar
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Service Brake System Pressure - Test
517 Track-Type Skidder Power Train Final Drive
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Crankcase Guard - Remove and Install
517 Track-Type Skidder Power Train Steering Clutches and Brakes
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Service Brake Control - Adjust
517 Track-Type Skidder Power Train Steering and Brake Control Valve
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hydraulic Oil Filter and Bypass Valve - Remove
CB-214D, CB-224D and CB-225D Vibratory Compactors Lubricant Viscosities
793C Off-Highway Truck Machine Systems Diverter Valve (Front Brake Oil Cooler) - Remove
517 Track-Type Skidder Power Train Idlers (Track)
793C Off-Highway Truck Machine Systems Diverter Valve (Front Brake Oil Cooler) - Install
793C Off-Highway Truck Machine Systems Diverter Valve (Front Brake Oil Cooler) - Disassemble
517 Track-Type Skidder Power Train Steering Clutch and Brake and Foot Brake Controls Linkage
Procedure for Installing the Neutral Start Switch{1424} Procedure for Installing the Neutral Start Switch{1424}
65E, 75E, 85E and 95E Agricultural Tractors Warranty Information
65E, 75E, 85E and 95E Agricultural Tractors Machine Decommissioning and Disposal
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Hydraulic System Pressure - Release