Diverter Valve (Front Brake Oil Cooler) - Install
Note: Check the O-ring seals. If necessary, replace any O-ring seals that are worn or damaged.
Note: Lubricate the O-ring seals with 1U-6396 O-Ring Assembly Compound.
- Position diverter valve (3). Install diverter valve (3) with the O-ring seal, the four washers, and four bolts (8).
- Connect the diverter valve to valve block (5) with the O-ring seal, the four washers, and four bolts (4).
- Install fitting (2) and fitting assembly (10).
- Install hose assemblies (1) and (9).
- Install the split flange.
- Connect hose assembly (7) with the O-ring seal, the four washers, and four bolts (6).
- Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual.
Show/hide table
Illustration 1 | g00435899 |
Show/hide table
Illustration 2 | g00435938 |
End By:
- Disconnect the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install" for the correct procedure.
Caterpillar Information System:
517 Track-Type Skidder Power Train Idlers (Track)
793C Off-Highway Truck Machine Systems Diverter Valve (Front Brake Oil Cooler) - Remove
CB-214D, CB-224D and CB-225D Vibratory Compactors Lubricant Viscosities
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hydraulic Oil Filter and Bypass Valve - Remove
527 Track-Type Skidder Power Train Recoil Group
517 Track-Type Skidder Power Train Front Frame
793C Off-Highway Truck Machine Systems Oil Cooler Core (Front Brake) - Remove
517 Track-Type Skidder Power Train Pivot Shaft
784C and 785C Off-Highway Truck/Tractors Plate Locations and Film Locations
527 Track-Type Skidder Power Train Track Roller Frame
517 Track-Type Skidder Power Train Equalizer Bar
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Service Brake System Pressure - Test
793C Off-Highway Truck Machine Systems Diverter Valve (Front Brake Oil Cooler) - Disassemble
517 Track-Type Skidder Power Train Steering Clutch and Brake and Foot Brake Controls Linkage
Procedure for Installing the Neutral Start Switch{1424} Procedure for Installing the Neutral Start Switch{1424}
65E, 75E, 85E and 95E Agricultural Tractors Warranty Information
65E, 75E, 85E and 95E Agricultural Tractors Machine Decommissioning and Disposal
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Hydraulic System Pressure - Release
65E, 75E, 85E and 95E Agricultural Tractors Engine Valve Lash - Check
65E, 75E, 85E and 95E Agricultural Tractors Engine Valve Rotators - Inspect
784C and 785C Off-Highway Truck/Tractors Cooling System Coolant (ELC) - Change
784C and 785C Off-Highway Truck/Tractors Cooling System Coolant Extender (ELC) - Add
784C and 785C Off-Highway Truck/Tractors Cooling System Coolant Level - Check