NOTICE |
---|
If the front housing is not installed, do not turn the crankshaft. Damage to the engine may occur. |
Illustration 1 | g00458938 |
Idler gear and components of the engine oil pump |
Type ... Gerotor pump
(1) C-clip
(2) Collar
(3) Spring
(4) Shim
(5) Oil pump cover
(6) Inner rotor
- Number of lobes ... 4
(7) Spring
(8) Outer rotor
- Number of lobes ... 5
Illustration 2 | g00459701 |
(A) Clearance between the inner rotor and the outer rotor is the following value. ...
Service Limit ...
(9) Bushing
(10) Idler gear
(11) Thrust washer
Illustration 3 | g01290817 |
(1) C-clip
(2) Collar
(4) Shim
(12) Feeler gauge
(B) When the components of the oil pump are installed on the front housing, measurement (B) between C-clip (1) and collar (2) must not exceed the following distance. ...
Service limit ...
The distance between the faces is adjusted with shims (4). The following sizes of shims are available:
- 0.10 mm
- 0.15 mm
- 0.20 mm
- 0.50 mm